Core drills create deep, large-diameter holes in concrete and masonry to run plumbing lines, HVAC ducts, electrical wires, telecom cables, and more in construction, utility, and infrastructure work. Also known as coring rigs, they rotate round, diamond-tipped bits at high power and high speed, grinding out material around the edge of a hole and leaving the core intact for removal. They drill in the vertical or horizontal position and are sometimes used to stitch drill overlapping core holes to make long slots and extra-large openings. Cordless core drills run on brand-specific batteries and allow use in areas without access to wired power. Corded core drills provide long run times for repetitive tasks and maintain full power during operation. Adapters and attachments modify core drills for specific applications.
This core drill stand with a mechanical bolt mount has an adjustable angle ranging from 90 to 25 degrees. It has 19 19/32 base length x 9 7/16 inches base width. The small base has three inches column size and 36 inches column height. It measures 19⅝-inch overall length and is for use with MXF301.
This core drill stand with a mechanical bolt mount has an adjustable angle ranging from 90 to 25 degrees. It has 19 19/32 base length x 9 7/16 inches base width. The small base has three inches column size and 36 inches column height. It measures 19⅝-inch overall length and is for use with MXF301.
This corded base stand has a cast aluminum base with four levelling screws for fast and accurate levelling adjustment. It has a 47-inch column height with a 2½-inch column size. The small base stand has a rear-mounted rack and pinion feed with a jackscrew for ceiling/back wall bracing.
This corded base stand has a cast aluminum base with four levelling screws for fast and accurate levelling adjustment. It has a 47-inch column height with a 2½-inch column size. The small base stand has a rear-mounted rack and pinion feed with a jackscrew for ceiling/back wall bracing.
This Mx Fuel handheld cordless coring drill kit with a stand operates on two Li-ion batteries with push activation. It has a Powerstate brushless motor, a 1¼ to 7 inches spindle size, a maximum bit capacity of six inches, and a speed ranging from 790 to 1550 RPM. The wet/dry kit with One-Key compatibility includes a charger and a ⅝"-11 bit adapter.
This Mx Fuel handheld cordless coring drill kit with a stand operates on two Li-ion batteries with push activation. It has a Powerstate brushless motor, a 1¼ to 7 inches spindle size, a maximum bit capacity of six inches, and a speed ranging from 790 to 1550 RPM. The wet/dry kit with One-Key compatibility includes a charger and a ⅝"-11 bit adapter.
This Mx Fuel handheld cordless coring drill kit operates on two Li-ion batteries with push activation. It has a Powerstate brushless motor, a 1¼ to 7 inches spindle size, a maximum bit capacity of six inches, and a speed ranging from 790 to 1550 RPM. The wet/dry kit with One-Key compatibility includes a drill, a trigger lock-on, and a ⅝"-11 bit adapter.
This Mx Fuel handheld cordless coring drill kit operates on two Li-ion batteries with push activation. It has a Powerstate brushless motor, a 1¼ to 7 inches spindle size, a maximum bit capacity of six inches, and a speed ranging from 790 to 1550 RPM. The wet/dry kit with One-Key compatibility includes a drill, a trigger lock-on, and a ⅝"-11 bit adapter.
This Mx Fuel handheld cordless coring drill kit operates on two Li-ion batteries with push activation. It has a Powerstate brushless motor, a 1¼ to 7 inches spindle size, a maximum bit capacity of six inches, and a speed ranging from 790 to 1550 RPM. The wet/dry kit with One-Key compatibility includes a ⅝"-11 bit adapter and a hard case with wheels.
This Mx Fuel handheld cordless coring drill kit operates on two Li-ion batteries with push activation. It has a Powerstate brushless motor, a 1¼ to 7 inches spindle size, a maximum bit capacity of six inches, and a speed ranging from 790 to 1550 RPM. The wet/dry kit with One-Key compatibility includes a ⅝"-11 bit adapter and a hard case with wheels.
This corded diamond coring motor operates at 120V/20A and 4⅘ HP. It has two variable speed settings of 300 to 600 RPM. The single-phase motor has an L5-20P plug, a 14-inch coring capacity in the concrete, a built-in water swivel, and shear pin overload protection. It includes an open-end wrench, a water control valve, and a hose adapter.
This corded diamond coring motor operates at 120V/20A and 4⅘ HP. It has two variable speed settings of 300 to 600 RPM. The single-phase motor has an L5-20P plug, a 14-inch coring capacity in the concrete, a built-in water swivel, and shear pin overload protection. It includes an open-end wrench, a water control valve, and a hose adapter.
This heavy-duty vacuum pump assembly is operable at a pressure of 1/3 HP. It is for use with 4115-22/4120-22/49-22-7100 diamond coring rigs and single pads.
This heavy-duty vacuum pump assembly is operable at a pressure of 1/3 HP. It is for use with 4115-22/4120-22/49-22-7100 diamond coring rigs and single pads.
This corded base stand has a cast aluminum base with four levelling screws for fast and accurate levelling adjustment. It has a 47-inch column height with a 2½-inch column size. The large base stand has a rear-mounted rack and pinion feed with a jackscrew for ceiling/back wall bracing.
This corded base stand has a cast aluminum base with four levelling screws for fast and accurate levelling adjustment. It has a 47-inch column height with a 2½-inch column size. The large base stand has a rear-mounted rack and pinion feed with a jackscrew for ceiling/back wall bracing.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.