Corded angle grinders rotate grinding wheels to remove surface material or rotate cut-off wheels to cut through material. Their head is set at a right angle to the tool body, making them more compact than vertical grinders and allowing for better visibility of the wheel and the work surface. Grinders with side handles allow a two-handed grip to improve stability and control. Angle grinders are commonly used to grind welds, prepare metal and concrete surfaces, bevel cutting tools and material edges, cut metal plates and pipe, and polish concrete, stone, and metal. These tools plug into an outlet to allow longer run times than cordless tools, so they are well suited for repetitive tasks and applications where portability isn't a concern. They maintain full power during operation and don't have batteries that require recharging.
This DWE series corded high-performance angle grinder has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a six-foot cord, a rat tail grip, and a wheel diameter of 4½, five, and six-inch. It includes an inner and outer disc flange.
This DWE series corded high-performance angle grinder has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a six-foot cord, a rat tail grip, and a wheel diameter of 4½, five, and six-inch. It includes an inner and outer disc flange.
This DWE series corded high-performance angle grinder with no lock-on has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a six-foot cord, and a rat tail grip. It includes a grinding wheel and wrench.
This DWE series corded high-performance angle grinder with no lock-on has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a six-foot cord, and a rat tail grip. It includes a grinding wheel and wrench.
This corded angle grinder has a lock-on rear trigger switch and operates at 120V/9A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has two conductors, a wheel of five-inch diameter and a 6.6-foot cord. It includes a five-inch depressed centre wheel, wheel cover, and lock nut wrench.
This corded angle grinder has a lock-on rear trigger switch and operates at 120V/9A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has two conductors, a wheel of five-inch diameter and a 6.6-foot cord. It includes a five-inch depressed centre wheel, wheel cover, and lock nut wrench.
This corded high-performance angle grinder has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a six-foot cord, and a rat tail grip. It includes a guard, grinding wheel, wrench, and overload protection.
This corded high-performance angle grinder has a bottom trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of six-inch diameter, a six-foot cord, and a rat tail grip. It includes a guard, grinding wheel, wrench, and overload protection.
This DW series corded medium angle grinder has a bottom trigger switch and operates at 120V/12A. It has a 2.5 horsepower motor, a maximum speed of 11000 RPM, and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of five-inch diameter, an eight-foot cord, and a rat tail grip.
This DW series corded medium angle grinder has a bottom trigger switch and operates at 120V/12A. It has a 2.5 horsepower motor, a maximum speed of 11000 RPM, and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of five-inch diameter, an eight-foot cord, and a rat tail grip.
This corded angle grinder has a trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel. The grinder includes a flange and spanner wrench.
This corded angle grinder has a trigger switch and operates at 120V/13A. It has a maximum speed of 9000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel. The grinder includes a flange and spanner wrench.
This SJS series corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes a side handle, lock nut wrench, wheel cover, six-inch depressed centre wheel, inner flange, and dust cover attachment.
This SJS series corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes a side handle, lock nut wrench, wheel cover, six-inch depressed centre wheel, inner flange, and dust cover attachment.
This DWE series corded small angle grinder has a bottom paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of 4½-inch diameter, a 6.3-foot cord, and a barrel grip. It includes a 4½-inch One-Touch guard.
This DWE series corded small angle grinder has a bottom paddle switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The standard head angle grinder has two conductors, a wheel of 4½-inch diameter, a 6.3-foot cord, and a barrel grip. It includes a 4½-inch One-Touch guard.
This corded angle grinder has a slide switch and operates at 120V/7A. It has a maximum speed of 12000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a spanner wrench and a type 27 guard.
This corded angle grinder has a slide switch and operates at 120V/7A. It has a maximum speed of 12000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of 4½-inch diameter, and an eight-foot cord. It has a standard head, a barrel grip, and a type 27 wheel. The grinder includes a spanner wrench and a type 27 guard.
This corded angle grinder has a rear trigger switch and operates at 120V/9A. It has a no-load speed of 12000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and a vibration level of 6.5 metre per second square. It includes a five-inch depressed centre wheel, wheel cover, side handle, and lock nut wrench.
This corded angle grinder has a rear trigger switch and operates at 120V/9A. It has a no-load speed of 12000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and a vibration level of 6.5 metre per second square. It includes a five-inch depressed centre wheel, wheel cover, side handle, and lock nut wrench.
This corded angle grinder has a two stage trigger switch and operates at 120V/10A. It has a no-load speed of 12000 RPM and a ?"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and a vibration level of 6.5 metre per second square. It includes a five-inch depressed centre wheel, wheel cover, side handle, and lock nut wrench.
This corded angle grinder has a two stage trigger switch and operates at 120V/10A. It has a no-load speed of 12000 RPM and a ?"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and a vibration level of 6.5 metre per second square. It includes a five-inch depressed centre wheel, wheel cover, side handle, and lock nut wrench.
This SJS series corded angle grinder has a trigger switch and operates at 120V/12.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and an 8.2-foot cord. It includes a depressed center wheel, lock nut wrench, toolless wheel cover, wheel cover, inner flange, and side handle.
This SJS series corded angle grinder has a trigger switch and operates at 120V/12.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of five-inch diameter and an 8.2-foot cord. It includes a depressed center wheel, lock nut wrench, toolless wheel cover, wheel cover, inner flange, and side handle.
This corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes a depressed center wheel, lock nut wrench, toolless wheel cover, inner flange, side handle, and plastic carrying case.
This corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and includes a depressed center wheel, lock nut wrench, toolless wheel cover, inner flange, side handle, and plastic carrying case.
This corded angle grinder has a trigger switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel. The grinder includes flanges and a side handle.
This corded angle grinder has a trigger switch and operates at 120V/11A. It has a maximum speed of 11000 RPM and a ⅝"-11 thread spindle. The grinder has two conductors, a wheel of five-inch diameter, and an eight-foot cord. It has a standard head, a rat tail grip, and a type 27 wheel. The grinder includes flanges and a side handle.
This SJS series corded angle grinder has a trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and a vibration level of 10 metre per second square. It includes a six-inch depressed centre wheel, inner flange, and dust cover attachment.
This SJS series corded angle grinder has a trigger switch and operates at 120V/10.5A. It has a no-load speed of 10000 RPM and a ⅝"-11 UNC thread spindle. The angle grinder has a wheel of six-inch diameter and a vibration level of 10 metre per second square. It includes a six-inch depressed centre wheel, inner flange, and dust cover attachment.
This SJS series medium-duty corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has a wheel of five-inch diameter, an eight-foot cord, and a rat tail grip. It includes an inner flange, side handle, and dust cover attachment.
This SJS series medium-duty corded angle grinder has a bottom rear trigger switch and operates at 120V/10.5A. It has a no-load speed of 11000 RPM and a ⅝"-11 UNC thread spindle. The flathead angle grinder has a wheel of five-inch diameter, an eight-foot cord, and a rat tail grip. It includes an inner flange, side handle, and dust cover attachment.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.
