Adhesives & Glues

This PC9462 epoxy adhesive backing compound kit is for use on crushers, has a shear strength of 19,000 PSI, and is available in a 20.5-pound bucket. With a two-hour functional cure and a 24-hour full cure, this kit has blue epoxy, a temperature range of -20 to 200℉, and varying coverage.

This PC9462 epoxy adhesive backing compound kit is for use on crushers, has a shear strength of 19,000 PSI, and is available in a 20.5-pound bucket. With a two-hour functional cure and a 24-hour full cure, this kit has blue epoxy, a temperature range of -20 to 200℉, and varying coverage.

5-minute epoxy is a rapid-curing, general purpose adhesive/encapsulant. Bonds metals, ceramics, glass, concrete, and wood, 25 mL Devtube.

5-minute epoxy is a rapid-curing, general purpose adhesive/encapsulant. Bonds metals, ceramics, glass, concrete, and wood, 25 mL Devtube.

This 27 spray adhesive is clear and comes in a 16 fluid ounce aerosol can. It meets the standards for California Air Resources Board, LEED, ozone Transport Commission. This spray adhesive features fast-drying, photo-safe, versatile. In addition, it has a working time of 15 seconds. It is not water-resistant.

This 27 spray adhesive is clear and comes in a 16 fluid ounce aerosol can. It meets the standards for California Air Resources Board, LEED, ozone Transport Commission. This spray adhesive features fast-drying, photo-safe, versatile. In addition, it has a working time of 15 seconds. It is not water-resistant.

This 404 instant adhesive is clear and comes in a 0.33 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features bonding plastics and elastomeric materials where very fast fixturing is required, low viscosity. In addition, it has a working time of 30 seconds and has a tensile strength of 755 psi. It is not water-resistant.

This 404 instant adhesive is clear and comes in a 0.33 fluid ounce bottle. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features bonding plastics and elastomeric materials where very fast fixturing is required, low viscosity. In addition, it has a working time of 30 seconds and has a tensile strength of 755 psi. It is not water-resistant.

This Hi-Strength 90 spray adhesive is clear and comes in a 24 fluid ounce aerosol can. It meets the standards for MMM-A-130B. This spray adhesive features fast-drying, easy to dispense. In addition, it has a working time of one minute. It is not water-resistant.

This Hi-Strength 90 spray adhesive is clear and comes in a 24 fluid ounce aerosol can. It meets the standards for MMM-A-130B. This spray adhesive features fast-drying, easy to dispense. In addition, it has a working time of one minute. It is not water-resistant.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550 Degrees F when fully cured.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550 Degrees F when fully cured.

This 454 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features non-wicking, specially suited to porous materials. In addition, it has a working time of 15 seconds and has a tensile strength of 2,190 psi. It is not water-resistant.

This 454 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, A-A-3097, CFIA. This instant adhesive features non-wicking, specially suited to porous materials. In addition, it has a working time of 15 seconds and has a tensile strength of 2,190 psi. It is not water-resistant.

This Super 77CA spray adhesive is clear and comes in a 18 fluid ounce aerosol can. It meets the standards for CARB Compliant, Greenguard Certified, LEED, SCAQMD Compliant. This spray adhesive features bonds a wide range of lightweight materials quickly, fast-drying, low soak-in eliminate clamping and dry time, low voc, photo-safe. In addition, it has a working time of 15 seconds.

This Super 77CA spray adhesive is clear and comes in a 18 fluid ounce aerosol can. It meets the standards for CARB Compliant, Greenguard Certified, LEED, SCAQMD Compliant. This spray adhesive features bonds a wide range of lightweight materials quickly, fast-drying, low soak-in eliminate clamping and dry time, low voc, photo-safe. In addition, it has a working time of 15 seconds.

This 495 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, A-A-3097. This instant adhesive features low viscosity. In addition, it has a working time of 20 seconds and has a tensile strength of 1,990 psi. It is not water-resistant.

This 495 instant adhesive is clear and comes in a 0.1 fluid ounce tube. It meets the standards for 29 CFR 1910.1200, A-A-3097. This instant adhesive features low viscosity. In addition, it has a working time of 20 seconds and has a tensile strength of 1,990 psi. It is not water-resistant.

Prism 401 adhesive is a low viscosity, fast curing, single component cyanoacrylate adhesive. Specifically formulated for difficult to bond substrates. Particularly suited for bonding porous or absorbent materials, 20 gram bottle.

Prism 401 adhesive is a low viscosity, fast curing, single component cyanoacrylate adhesive. Specifically formulated for difficult to bond substrates. Particularly suited for bonding porous or absorbent materials, 20 gram bottle.

Quickset 404 is an industrial instant adhesive liquid for general maintenance and repair. Set instantly - no clamping, no mixing, no waiting, 1/3 oz. bottle.

Quickset 404 is an industrial instant adhesive liquid for general maintenance and repair. Set instantly - no clamping, no mixing, no waiting, 1/3 oz. bottle.

This 725 hot melt adhesive is clear. This hot melt adhesive features safe for food packaging, general purpose, high or adjustable temperature. In addition, it has a working time of 30 seconds.

This 725 hot melt adhesive is clear. This hot melt adhesive features safe for food packaging, general purpose, high or adjustable temperature. In addition, it has a working time of 30 seconds.

This sensor-safe, high temperature, room temperature vulcanizing gasket maker resists ageing, weathering, and thermal cycling without hardening, shrinking, or cracking. The red, thixotropic, silicone paste can withstand a temperature range of -59 to 313 Degrees C and has a flashpoint of greater than 93 Degrees C. The non-corrosive sealant begins to harden in 30 minutes and fully cures in 24 hours This non-corrosive product comes in a 300-millilitre cartridge.

This sensor-safe, high temperature, room temperature vulcanizing gasket maker resists ageing, weathering, and thermal cycling without hardening, shrinking, or cracking. The red, thixotropic, silicone paste can withstand a temperature range of -59 to 313 Degrees C and has a flashpoint of greater than 93 Degrees C. The non-corrosive sealant begins to harden in 30 minutes and fully cures in 24 hours This non-corrosive product comes in a 300-millilitre cartridge.

Hot-melt plastic adhesives are 100% solid, solvent-free thermoplastic resins that become fluid when heated. When in molten state, they quickly wet out the surface and upon cooling harden to form a strong bond to many surfaces, 5/8 x 2 in.

Hot-melt plastic adhesives are 100% solid, solvent-free thermoplastic resins that become fluid when heated. When in molten state, they quickly wet out the surface and upon cooling harden to form a strong bond to many surfaces, 5/8 x 2 in.

This heavy-duty, high-strength spray adhesive is resistant to water, extreme weather conditions, dries clear, and ideal for use in automotive and marine applications. It bonds quickly to foam, carpet, fabrics, plastics, and rubber, with a full cure time of 24 hours and is for use in temperatures less than 170 Degrees F. Available in a 474-gram aerosol can.

This heavy-duty, high-strength spray adhesive is resistant to water, extreme weather conditions, dries clear, and ideal for use in automotive and marine applications. It bonds quickly to foam, carpet, fabrics, plastics, and rubber, with a full cure time of 24 hours and is for use in temperatures less than 170 Degrees F. Available in a 474-gram aerosol can.

This 27 multi-purpose spray adhesive is clear and comes in a 370 gram aerosol can. It meets the standards for California Air Resources Board, LEED Credits, ozone Transport Commission. This multi-purpose spray adhesive features fast-tack, mist spray pattern, multi-purpose, versatile, very little soak in on porous substrates. In addition, it has a working time of 15 seconds.

This 27 multi-purpose spray adhesive is clear and comes in a 370 gram aerosol can. It meets the standards for California Air Resources Board, LEED Credits, ozone Transport Commission. This multi-purpose spray adhesive features fast-tack, mist spray pattern, multi-purpose, versatile, very little soak in on porous substrates. In addition, it has a working time of 15 seconds.