These raceways have a single channel for routing wire and cable. This design is ideal for simple runs where the conduit doesn't need to be separated. Surface raceways mount on walls and ceilings to bring wire and cable into a space. Wire and cable are laid into the raceways after installation, keeping the conductors from being exposed and preventing kinks. These raceways commonly house communication and power cable, and they're often installed in educational facilities, hospitals, and other industrial and commercial settings. Metallic raceways are durable and good for indoor areas with high traffic. Nonmetallic raceways are corrosion-resistant and may be used indoors and outdoors in low-traffic or out-of-reach areas.
This T-45 junction box is made of PVC, and is off white. It features single gang two-piece snap together outlet box with adhesive backing. In addition, it meets the standards for RoHS. It has length of five inches, width of 3.26 inch, and a height of 1.62 inch. It is for use with Pan-Way T-45 or LD profile raceways.
This T-45 junction box is made of PVC, and is off white. It features single gang two-piece snap together outlet box with adhesive backing. In addition, it meets the standards for RoHS. It has length of five inches, width of 3.26 inch, and a height of 1.62 inch. It is for use with Pan-Way T-45 or LD profile raceways.
This PremiseTrak raceway is made of non-metallic, and is white. It includes base, cover. In addition, it meets the standards for UL 5A. It has length of five feet, width of 0.75 inches, and a height of 0.68 inch. It is for use with PremiseTrak series raceways, can be used outdoors. It also has adhesive mounting.
This PremiseTrak raceway is made of non-metallic, and is white. It includes base, cover. In addition, it meets the standards for UL 5A. It has length of five feet, width of 0.75 inches, and a height of 0.68 inch. It is for use with PremiseTrak series raceways, can be used outdoors. It also has adhesive mounting.
This LD5 raceway is made of PVC, and is off white. In addition, it meets the standards for cULus listed File E90378. It has length of 96 inches, width of one inch, and a height of 5/8-inch. It can be used outdoors. It also has adhesive mounting.
This LD5 raceway is made of PVC, and is off white. In addition, it meets the standards for cULus listed File E90378. It has length of 96 inches, width of one inch, and a height of 5/8-inch. It can be used outdoors. It also has adhesive mounting.
This 4000 raceway is made of steel, and is grey. In addition, it meets the standards for PEP. It has length of 10 feet, width of 4¾-inch, and a height of 1¾-inch. It can be used outdoors. It also has screw-on mounting.
This 4000 raceway is made of steel, and is grey. In addition, it meets the standards for PEP. It has length of 10 feet, width of 4¾-inch, and a height of 1¾-inch. It can be used outdoors. It also has screw-on mounting.
This T-45 raceway is made of PVC, and is off white. In addition, it meets the standards for CSA C22.2 No. 62, UL 5A. It has length of 96 inches, width of 2⅜ inch, and a height of 1¼ inch. It can be used outdoors. It also has screw-on mounting.
This T-45 raceway is made of PVC, and is off white. In addition, it meets the standards for CSA C22.2 No. 62, UL 5A. It has length of 96 inches, width of 2⅜ inch, and a height of 1¼ inch. It can be used outdoors. It also has screw-on mounting.
This PN05 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 1/eight inches, and a height of 5/8-inch. It can be used outdoors. It also has adhesive mounting.
This PN05 raceway is made of non-metallic, and is ivory-coloured. In addition, it meets the standards for PEP and RoHS. It has length of 96 inches, width of 1 1/eight inches, and a height of 5/8-inch. It can be used outdoors. It also has adhesive mounting.
This 400 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of⅞ inch, and a height of 7/16 inches. It can be used outdoors. It also has adhesive mounting.
This 400 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of⅞ inch, and a height of 7/16 inches. It can be used outdoors. It also has adhesive mounting.
This 700 raceway is made of steel, and is ivory-coloured. In addition, it meets the standards for ADA compliant, UL 5. It has length of 10 feet, width of ¾-inch, and a height of 11/16 inches. It also has screw-on mounting.
This 700 raceway is made of steel, and is ivory-coloured. In addition, it meets the standards for ADA compliant, UL 5. It has length of 10 feet, width of ¾-inch, and a height of 11/16 inches. It also has screw-on mounting.
This 500, 700 shallow device box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 1.37 inch. It is for use with 500 and 700 Raceways.
This 500, 700 shallow device box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 1.37 inch. It is for use with 500 and 700 Raceways.
This 500, 700 deep device box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 1.75 inch. It is for use with 500 and 700 raceways.
This 500, 700 deep device box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 1.75 inch. It is for use with 500 and 700 raceways.
This 500, 700 shallow device box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.81 inch, and a height of 1.37 inch. It is for use with 500 and 700 raceways.
This 500, 700 shallow device box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.81 inch, and a height of 1.37 inch. It is for use with 500 and 700 raceways.
This 500, 700 shallow switch and receptacle box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 0.937 inch. It is for use with 500 and 700 raceways.
This 500, 700 shallow switch and receptacle box is made of steel, and is ivory-coloured. It features fittings have removable covers, low-profile, scuffcoat finish. In addition, it meets the standards for File E41751 Guide RJPR, meets Article 386 of NEC and meets Section 12-600 of CEC, RoHS, UL and cUL listed File E4376 Guide RJBT. It has length of 4.62 inches, width of 2.87 inches, and a height of 0.937 inch. It is for use with 500 and 700 raceways.
This T-45 deep junction box is made of PVC, and is off white. It features single gang two-piece snap together outlet box with adhesive backing. In addition, it meets the standards for RoHS. It has length of 5.19 inch, width of 3.45 inches, and a height of 2.75 inch. It is for use with Pan-Way T-45 Raceways.
This T-45 deep junction box is made of PVC, and is off white. It features single gang two-piece snap together outlet box with adhesive backing. In addition, it meets the standards for RoHS. It has length of 5.19 inch, width of 3.45 inches, and a height of 2.75 inch. It is for use with Pan-Way T-45 Raceways.
This 500 raceway is made of steel, and is ivory-coloured. In addition, it meets the standards for ADA compliant, UL 5. It has length of 10 feet, width of ¾-inch, and a height of ½ inch. It also has screw-on mounting.
This 500 raceway is made of steel, and is ivory-coloured. In addition, it meets the standards for ADA compliant, UL 5. It has length of 10 feet, width of ¾-inch, and a height of ½ inch. It also has screw-on mounting.
This 2300 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of 2¼ inch, and a height of 11/16 inches. It can be used outdoors. It also has adhesive mounting.
This 2300 raceway is made of PVC, and is ivory-coloured. It includes wide adhesive tape. In addition, it meets the standards for PEP and RoHS. It has length of 60 inches, width of 2¼ inch, and a height of 11/16 inches. It can be used outdoors. It also has adhesive mounting.
This OFR device box is made of steel, and is black. It features accepts OFR series device plates, allows multiple services at a single point-of-use, removable divider can be aligned with any of the raceway channels. In addition, it meets the standards for cETLus listed, RoHS. It has length of 1eight inches, width of 12.5 inch. It is for use with OFR Raceways.
This OFR device box is made of steel, and is black. It features accepts OFR series device plates, allows multiple services at a single point-of-use, removable divider can be aligned with any of the raceway channels. In addition, it meets the standards for cETLus listed, RoHS. It has length of 1eight inches, width of 12.5 inch. It is for use with OFR Raceways.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.