Helmets and hard hats help to protect workers from hazards that can impact the head. They have a suspension system that transfers the impact force though the body down to the feet, helping to reduce strain to the neck, head, and spine. Hard hats and helmets are OSHA compliant and ANSI rated and should be regularly inspected for structural integrity. Types and classes of hard hats and helmets combine to indicate the impact type (vertical only or vertical and angled) and level of electrical protection (none, low voltage, or high voltage) provided. Hard hats are used by construction workers, road crews, or wherever it's required by OSHA safety regulations.
This V-Gard full brim slotted cap with Hauser fits head sizes 6 1/2 to 8 and comes in high-visibility orange. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. The general purpose cap has a four-point Fas-Trac III ratchet suspension with side slots for accessories.
This V-Gard full brim slotted cap with Hauser fits head sizes 6 1/2 to 8 and comes in high-visibility orange. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. The general purpose cap has a four-point Fas-Trac III ratchet suspension with side slots for accessories.
This V-Gard 500 vented front brim slotted cap with Weyer-I-Level logo fits head sizes 6 1/2 to 8 and comes in high-visibility orange. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. The general purpose slotted cap has a four-point Fas-Trac III ratchet suspension with side slots for accessories. This cap has Glaregard underbrim to reduce glare from reflective surfaces.
This V-Gard 500 vented front brim slotted cap with Weyer-I-Level logo fits head sizes 6 1/2 to 8 and comes in high-visibility orange. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. The general purpose slotted cap has a four-point Fas-Trac III ratchet suspension with side slots for accessories. This cap has Glaregard underbrim to reduce glare from reflective surfaces.
This V-Gard full brim slotted hat fits sizes 6 1/2 to 8 and comes in navy grey. It is made of strong polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. The general purpose slotted hat has a four-point Fas-Trac III ratchet suspension with side-slots for accessories.
This V-Gard full brim slotted hat fits sizes 6 1/2 to 8 and comes in navy grey. It is made of strong polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. The general purpose slotted hat has a four-point Fas-Trac III ratchet suspension with side-slots for accessories.
This V-Gard full brim slotted hat fits sizes 6 1/2 to 8 and comes in white. It is made of strong polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. The general purpose slotted hat has a four-point Fas-Trac III ratchet suspension with side-slots for accessories.
This V-Gard full brim slotted hat fits sizes 6 1/2 to 8 and comes in white. It is made of strong polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. The general purpose slotted hat has a four-point Fas-Trac III ratchet suspension with side-slots for accessories.
This V-Gard H1 trivent safety helmet fits head sizes 6 1/2 to 8 and comes in orange. It is made of high density polyethylene and has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene. It has a four-point chin strap with multiple adjustment points for customized fit and comfort.
This V-Gard H1 trivent safety helmet fits head sizes 6 1/2 to 8 and comes in orange. It is made of high density polyethylene and has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene. It has a four-point chin strap with multiple adjustment points for customized fit and comfort.
This V-Gard H1 trivent safety helmet fits head sizes 6 1/2 to 8 and comes in red. It is made of high density polyethylene and has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene. It has a four-point chin strap with multiple adjustment points for customized fit and comfort.
This V-Gard H1 trivent safety helmet fits head sizes 6 1/2 to 8 and comes in red. It is made of high density polyethylene and has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene. It has a four-point chin strap with multiple adjustment points for customized fit and comfort.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in green. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in green. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in grey. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in grey. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This V-Gard H1 trivent safety helmet fits head sizes 6 1/2 to 8 and comes in yellow. It is made of high density polyethylene and has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene. It has a four-point chin strap with multiple adjustment points for customized fit and comfort.
This V-Gard H1 trivent safety helmet fits head sizes 6 1/2 to 8 and comes in yellow. It is made of high density polyethylene and has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene. It has a four-point chin strap with multiple adjustment points for customized fit and comfort.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in yellow. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in yellow. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This clear V-Gard H1 half-face visor measures 9 1/4 width x 4 3/4 height inches. It is made of polycarbonate and meets the CSA Z94.3 standard. This wind-resistant face shield with a frameless design is contoured for a closer fit, a dual pivot hinge for a low profile to improve balance and a simple push-button design. It includes an anti-fog and scratch-resistant coating.
This clear V-Gard H1 half-face visor measures 9 1/4 width x 4 3/4 height inches. It is made of polycarbonate and meets the CSA Z94.3 standard. This wind-resistant face shield with a frameless design is contoured for a closer fit, a dual pivot hinge for a low profile to improve balance and a simple push-button design. It includes an anti-fog and scratch-resistant coating.
Work safely with this black hard hat with a ratchet suspension. This hard hat is made of ABS polymer and polyester. It meets high and low-temperature tests, meets CSA Z94.1-15 standards, and weighs 21 ounces.
Work safely with this black hard hat with a ratchet suspension. This hard hat is made of ABS polymer and polyester. It meets high and low-temperature tests, meets CSA Z94.1-15 standards, and weighs 21 ounces.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in blue. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in blue. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This V-Gard H1 trivent safety helmet fits head sizes 6 1/2 to 8 and comes in black. It is made of high density polyethylene and has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene. It has a four-point chin strap with multiple adjustment points for customized fit and comfort.
This V-Gard H1 trivent safety helmet fits head sizes 6 1/2 to 8 and comes in black. It is made of high density polyethylene and has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene. It has a four-point chin strap with multiple adjustment points for customized fit and comfort.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in orange. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This V-Gard H1 no vent safety helmet fits head sizes 6 1/2 to 8 and comes in orange. It is made of high density polyethylene and meets the CSA Z94.1-2015, Type 1, Class E standard. This helmet has a four-point Fas-Trac III pivot ratchet suspension. The helmet has a foam liner that maximizes air flow and breathability for optimal cooling and hygiene.
This steel mesh V-Gard H1 reusable faceshield visor measures 9 1/4 width x 9 1/4 height inches. The wind-resistant face shield with a frameless design is contoured for a closer fit, a dual pivot hinge for a low profile to improve balance, and simple push-button use. It includes an anti-fog and scratch-resistant visor coating.
This steel mesh V-Gard H1 reusable faceshield visor measures 9 1/4 width x 9 1/4 height inches. The wind-resistant face shield with a frameless design is contoured for a closer fit, a dual pivot hinge for a low profile to improve balance, and simple push-button use. It includes an anti-fog and scratch-resistant visor coating.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.