Load-Bearing Structural Adhesives

5-minute epoxy is a rapid-curing, general purpose adhesive/encapsulant. Bonds metals, ceramics, glass, concrete, and wood, 25 mL Devtube.

5-minute epoxy is a rapid-curing, general purpose adhesive/encapsulant. Bonds metals, ceramics, glass, concrete, and wood, 25 mL Devtube.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550 Degrees F when fully cured.

J-B Weld is The Original Cold Weld two-part epoxy system that provides strong, lasting repairs to metal and multiple surfaces. Mixed at a ratio of 1:1, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. A full cure is reached in 15-24 hours. J-B Weld has a tensile strength of 5020 PSI and sets to a hard bond overnight. It can withstand temperatures up to 550 Degrees F when fully cured.

This Permatex clear gap-filling epoxy adhesive has a 50-minute functional cure, a full cure in 24 hours, and a temperature range of -60 to 180℉. The cartridge includes a syringe and 25 millilitres of adhesive. This adhesive has 3400 PSI, a 1:1 mix ratio, and is designed as a hardener.

This Permatex clear gap-filling epoxy adhesive has a 50-minute functional cure, a full cure in 24 hours, and a temperature range of -60 to 180℉. The cartridge includes a syringe and 25 millilitres of adhesive. This adhesive has 3400 PSI, a 1:1 mix ratio, and is designed as a hardener.

Fixmaster Poxy Pak is a fast cure, general purpose epoxy that bonds virtually any material, fills or seals cracks and rebuild worn surfaces. Built-in plunger for easy dispensing without equipment. Working time is approximately four minutes.

Fixmaster Poxy Pak is a fast cure, general purpose epoxy that bonds virtually any material, fills or seals cracks and rebuild worn surfaces. Built-in plunger for easy dispensing without equipment. Working time is approximately four minutes.

2-Ton(R) epoxy is an extremely strong, water-resistant adhesive. Bonds with ferrous and non-ferrous metals, ceramics, wood, concrete or glass. Medium cure time, water-resistant, non-shrinking, 25 mL Devtube.

2-Ton(R) epoxy is an extremely strong, water-resistant adhesive. Bonds with ferrous and non-ferrous metals, ceramics, wood, concrete or glass. Medium cure time, water-resistant, non-shrinking, 25 mL Devtube.

J-B Weld KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 230 Degrees F.

J-B Weld KwikWeld is a fast setting version of The Original J-B Weld two-part epoxy cold weld system that provides strong, lasting repairs to metal and multiple other surface types. After mixing, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. J-B KwikWeld sets in 6 minutes and is fully cured in 4-6 hours. J-B KwikWeld cures to a dark grey color, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 230 Degrees F.

330 depend adhesive sets in minutes to a tough acrylic adhesive with high peel and impact strength. Bonds almost all combinations of materials, including glass. Kit includes 25 mL syringe applicator and 25g aerosol activator.

330 depend adhesive sets in minutes to a tough acrylic adhesive with high peel and impact strength. Bonds almost all combinations of materials, including glass. Kit includes 25 mL syringe applicator and 25g aerosol activator.

Gorilla epoxy is a two-part epoxy with gap-filling capabilities and an all-purpose formula that easily bonds steel, wood, aluminum, and ceramic. This epoxy takes five minutes to set, is water- and solvent-resistant, and impact-tough. It comes in a 25-millilitre bottle and is clear.

Gorilla epoxy is a two-part epoxy with gap-filling capabilities and an all-purpose formula that easily bonds steel, wood, aluminum, and ceramic. This epoxy takes five minutes to set, is water- and solvent-resistant, and impact-tough. It comes in a 25-millilitre bottle and is clear.

This PC-superepoxy epoxy adhesive is clear and comes in a syringe. It meets the standards for ASTM C413, ASTM C580, ASTM D1002, ASTM D2240, ASTM D648, ASTM D695, ASTM D792. This epoxy adhesive features impact resistant. In addition, it is for use with multi-surface and it has a working time of 15 minutes.

This PC-superepoxy epoxy adhesive is clear and comes in a syringe. It meets the standards for ASTM C413, ASTM C580, ASTM D1002, ASTM D2240, ASTM D648, ASTM D695, ASTM D792. This epoxy adhesive features impact resistant. In addition, it is for use with multi-surface and it has a working time of 15 minutes.

5-minute epoxy gel is a fast-curing, thixotropic, non-migrating adhesive, designed for filling gaps and for bonding rough as well as smooth surfaces. High tensile strength (2500 PSI). Good solvent resistance. Ideal for vertical surfaces, 25 mL Devtube.

5-minute epoxy gel is a fast-curing, thixotropic, non-migrating adhesive, designed for filling gaps and for bonding rough as well as smooth surfaces. High tensile strength (2500 PSI). Good solvent resistance. Ideal for vertical surfaces, 25 mL Devtube.

This clear, eight-ounce cold-weld epoxy adhesive tube is for use on metal, automotive, plumbing, and concrete. With a functional cure in six minutes and a full cure in four to six hours, this adhesive has a mixing ratio of 1:1 and a maximum temperature of 300℉.

This clear, eight-ounce cold-weld epoxy adhesive tube is for use on metal, automotive, plumbing, and concrete. With a functional cure in six minutes and a full cure in four to six hours, this adhesive has a mixing ratio of 1:1 and a maximum temperature of 300℉.

J-B Weld ClearWeld Syringe is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld sets to a hard, permanent bond.

J-B Weld ClearWeld Syringe is a quick setting, multipurpose two part epoxy that provides a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood and metal. ClearWeld is designed to cure with a clear, transparent bond when used at thicknesses of less than 15 mil. ClearWeld has a 1:1 mixing ratio, sets in 5 minutes and cures in 1 hour. With a tensile strength of 3900 PSI, ClearWeld sets to a hard, permanent bond.

This Heavy Duty construction adhesive is white and comes in a 9 fluid ounce cartridge. It meets the standards for APA AFG-01, ASTM C557, ASTM D3498, VOC Compliant. This construction adhesive features all-weather adhesion while being tough and versatile. In addition, it has a working time of 30 seconds and is waterproof.

This Heavy Duty construction adhesive is white and comes in a 9 fluid ounce cartridge. It meets the standards for APA AFG-01, ASTM C557, ASTM D3498, VOC Compliant. This construction adhesive features all-weather adhesion while being tough and versatile. In addition, it has a working time of 30 seconds and is waterproof.

This emblem adhesive begins to harden in 10 to 20 minutes and is fully cured in four hours. With a urethane base, this press-in-place emblem adhesive has a high-strength bond and measures 2 inches x 12 feet.

This emblem adhesive begins to harden in 10 to 20 minutes and is fully cured in four hours. With a urethane base, this press-in-place emblem adhesive has a high-strength bond and measures 2 inches x 12 feet.

This ClearWeld epoxy adhesive is clear and comes in a syringe. It meets the standards for 29 CFR 1910.1200. This epoxy adhesive features cures with a clear, multi-purpose, quick setting, strong and lasting bond on most surfaces, transparent bond when used at thicknesses of less than 15 mil and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 3900 psi.

This ClearWeld epoxy adhesive is clear and comes in a syringe. It meets the standards for 29 CFR 1910.1200. This epoxy adhesive features cures with a clear, multi-purpose, quick setting, strong and lasting bond on most surfaces, transparent bond when used at thicknesses of less than 15 mil and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 3900 psi.

This 8008 adhesive comes in a five ounce tube. It meets the standards for CEPA, NICNAS, RA 6969, TSCA. This adhesive features black colour designed to match vehicle weatherstrip for virtually invisible repair, fast drying, flexible, good oil and water resistance, rubbery adhesive, strong, withstands vibrations and extreme temperature variation. In addition, it has a working time of one minute.

This 8008 adhesive comes in a five ounce tube. It meets the standards for CEPA, NICNAS, RA 6969, TSCA. This adhesive features black colour designed to match vehicle weatherstrip for virtually invisible repair, fast drying, flexible, good oil and water resistance, rubbery adhesive, strong, withstands vibrations and extreme temperature variation. In addition, it has a working time of one minute.