Corner-Rounding End Mills

This corner rounding end mill is made out of carbide with a AlTiN finish. It is double end with a straight 5/16 inch diameter shank. This corner rounding end mill is designed for use with aluminum, brass, bronze, copper, magnesium, and steel, and is for finishing, roughing, and centre cutting. It also has a 1/8 inch corner radius, right hand cutting direction, along with three flutes and 2½ inch length.

This corner rounding end mill is made out of carbide with a AlTiN finish. It is double end with a straight 5/16 inch diameter shank. This corner rounding end mill is designed for use with aluminum, brass, bronze, copper, magnesium, and steel, and is for finishing, roughing, and centre cutting. It also has a 1/8 inch corner radius, right hand cutting direction, along with three flutes and 2½ inch length.

This centre cutting, single end finishing ball nose end mill has a right hand cutting direction and 4 flutes. It has a diameter of 5/8 inches, a 1/2 inch length of cut, an overall length of 3 inches, and a 1/2 inch shank with a weldon flat.

This centre cutting, single end finishing ball nose end mill has a right hand cutting direction and 4 flutes. It has a diameter of 5/8 inches, a 1/2 inch length of cut, an overall length of 3 inches, and a 1/2 inch shank with a weldon flat.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/8 inch corner radius, right hand cutting direction, along with four flutes and 3½ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/8 inch corner radius, right hand cutting direction, along with four flutes and 3½ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/4 inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/16 inch corner radius, right hand cutting direction, along with four flutes and 3½ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/4 inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/16 inch corner radius, right hand cutting direction, along with four flutes and 3½ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat one inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 1/2 inch corner radius, right hand cutting direction, along with four flutes and 4⅛ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat one inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 1/2 inch corner radius, right hand cutting direction, along with four flutes and 4⅛ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/32 inch corner radius, right hand cutting direction, along with four flutes and 2½ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/32 inch corner radius, right hand cutting direction, along with four flutes and 2½ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 5/16 inch corner radius, right hand cutting direction, along with four flutes and 3¼ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 5/16 inch corner radius, right hand cutting direction, along with four flutes and 3¼ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 1/4 inch corner radius, right hand cutting direction, along with four flutes and three inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 1/4 inch corner radius, right hand cutting direction, along with four flutes and three inch length.

This corner rounding end mill is made out of carbide with a bright (uncoated) finish. It is double end with a straight 5/8 inch diameter shank. This corner rounding end mill is designed for use with aluminum, brass, bronze, copper, magnesium, and steel, and is for finishing, roughing, and centre cutting. It also has a 1/4 inch corner radius, right hand cutting direction, along with three flutes and 3½ inch length.

This corner rounding end mill is made out of carbide with a bright (uncoated) finish. It is double end with a straight 5/8 inch diameter shank. This corner rounding end mill is designed for use with aluminum, brass, bronze, copper, magnesium, and steel, and is for finishing, roughing, and centre cutting. It also has a 1/4 inch corner radius, right hand cutting direction, along with three flutes and 3½ inch length.

This corner rounding end mill is made out of carbide with a bright (uncoated) finish. It is double end with a straight 5/16 inch diameter shank. This corner rounding end mill is designed for use with aluminum, brass, bronze, copper, magnesium, and steel, and is for finishing, roughing, and centre cutting. It also has a 1/8 inch corner radius, right hand cutting direction, along with three flutes and 2½ inch length.

This corner rounding end mill is made out of carbide with a bright (uncoated) finish. It is double end with a straight 5/16 inch diameter shank. This corner rounding end mill is designed for use with aluminum, brass, bronze, copper, magnesium, and steel, and is for finishing, roughing, and centre cutting. It also has a 1/8 inch corner radius, right hand cutting direction, along with three flutes and 2½ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/16 inch corner radius, right hand cutting direction, along with four flutes and 2 15/16 inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/16 inch corner radius, right hand cutting direction, along with four flutes and 2 15/16 inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 1/16 inch corner radius, right hand cutting direction, along with four flutes and 2½ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat 3/8 inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 1/16 inch corner radius, right hand cutting direction, along with four flutes and 2½ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon 7/8 inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/8 inch corner radius, right hand cutting direction, along with four flutes and 3¾ inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon 7/8 inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 3/8 inch corner radius, right hand cutting direction, along with four flutes and 3¾ inch length.

This corner rounding end mill is made out of carbide with a bright (uncoated) finish. It is double end with a straight 3/16 inch diameter shank. This corner rounding end mill is designed for use with aluminum, brass, bronze, copper, magnesium, and steel, and is for finishing, roughing, and centre cutting. It also has a 1/16 inch corner radius, right hand cutting direction, along with three flutes and two inch length.

This corner rounding end mill is made out of carbide with a bright (uncoated) finish. It is double end with a straight 3/16 inch diameter shank. This corner rounding end mill is designed for use with aluminum, brass, bronze, copper, magnesium, and steel, and is for finishing, roughing, and centre cutting. It also has a 1/16 inch corner radius, right hand cutting direction, along with three flutes and two inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 1/8 inch corner radius, right hand cutting direction, along with four flutes and three inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 1/8 inch corner radius, right hand cutting direction, along with four flutes and three inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 5/32 inch corner radius, right hand cutting direction, along with four flutes and three inch length.

This corner rounding end mill is made out of high speed steel with a bright (uncoated) finish. It has a single end, with a Weldon flat ½ inch diameter shank. This corner rounding end mill is designed for use with cast iron and steel, and is for finishing and non-centre cutting. It also has a 5/32 inch corner radius, right hand cutting direction, along with four flutes and three inch length.