Skip Content
SPEED REDUCER 56C 60 TO 1 close
close x

images.360.info.textHead1 360° images.360.info.textHead2

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.
Close x
USING 360° VIEWING:

Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.

Zoom In: Double click on image.

Zoom Out/Reset: Put photo at full zoom & then double click.

SPEED REDUCER 56C 60 TO 1

DAYTON

http://catalogue.acklandsgrainger.com/2017?hybris=true
  • Item # WWG4Z730
  • Mfr. Model # 4Z730
  • UNSPSC # 26111503
  • CATALOGUE PAGE # N/A
  • Shipping Weight 54.05 lbs

Technical Specs

  • Finish Powdered Epoxy Paint
  • Item Speed Reducer
  • Nominal Output RPM 29
  • Number of Stages 1
  • Bearings Ball
  • Duty Standard
  • Input RPM 1750
  • Mounting Any Position Except Input Motor Shaft Up
  • Nominal Ratio 60:1
  • Rotation Forward/Reverse
  • Lubrication Kluber Food Grade
  • Shaft Orientation Right Angle
  • Worm Center Distance 2.62"
  • Max. Input HP 3/4
  • Dimension U 1-1/4"
  • Housing Material Cast Iron
  • Seal Type Double Lip
  • Standards AGMA
  • Gear Material Hardened and Ground Steel
  • Frame 56C
  • Reducer Model No. 84080
  • Bore Dia. 5/8"
  • Speed Reducer Type C-Face
  • Overhung Load 1300 lb.
  • Gear Type Worm
  • Output Torque @ 1/2 HP 407 in.-lb.
  • Output Torque @ 1 HP 1021 in.-lb.
  • Single/Double Output/Universal Single Output
  • Output Torque @ 3/4 HP 653 in-lbs
  • Output Torque @ 1/40 HP 3,600 in-lbs
  • Pinion Material Hardened Steel
  • Output Shaft Dia. 1-1/4"
  • Solid/Hollow Output Shaft Solid
  • Worm Gear Material Bronze
  • Max. Output Torque 1,021 in.-lb.

Compliance and Restrictions

  • None

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list