Skip Content
REDUCER SPEED 140RPM close
close x

images.360.info.textHead1 360° images.360.info.textHead2

  1. Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.
  2. Zoom In: Double click on image.
  3. Zoom Out/Reset: Put photo at full zoom & then double click.
Close x
USING 360° VIEWING:

Rotate: Use top-to-bottom, side-to-side by use of mouse arrow.

Zoom In: Double click on image.

Zoom Out/Reset: Put photo at full zoom & then double click.

REDUCER SPEED 140RPM

DAYTON

http://catalogue.acklandsgrainger.com/2017?hybris=true
  • Item # DTN4Z719
  • Mfr. Model # 4Z719
  • UNSPSC # 26111503
  • CATALOGUE PAGE # N/A
  • Shipping Weight 25.0 lbs

Technical Specs

  • Number of Stages 1
  • Finish Powdered Epoxy Paint
  • Nominal Output RPM 140
  • Item Speed Reducer
  • Bearings Ball
  • Duty Standard
  • Input RPM 1750
  • Nominal Ratio 12.5:1
  • Rotation Forward/Reverse
  • Shaft Orientation Parallel
  • Lubrication Klubersynth UH1 6-460
  • Max. Input HP 1
  • Bore Dia. 5/8"
  • Output Torque @ 1 HP 320 in.-lb.
  • Output Torque @ 1/40 HP 3,600 in-lbs
  • Output Torque @ 3/4 HP 214 in-lbs
  • Housing Material Cast Iron
  • Seal Type Double Lip
  • Standards AGMA
  • Gear Material Hardened and Ground Steel
  • Frame 56C
  • Overhung Load 709 lbs.
  • Gear Type Helical
  • Output Shaft Dia. 1"
  • Output Shaft Height 4-7/8"
  • Speed Reducer Type C-Face
  • Pinion Material Hardened Steel
  • Single/Double Output/Universal Single Output
  • Solid/Hollow Output Shaft Solid
  • Output Torque @ 1/2 HP 143 in.-lb.
  • Output Torque @ 1.5 HP 427 in-lbs
  • Output Torque @ 1/3 HP 107 in.-lb.
  • Dimension U 1"
  • Reducer Model No. 84404
  • Max. Output Torque 427 in.-lb.
  • Output Torque @ 1/4 HP 107 in.-lb.

Compliance and Restrictions

  • None

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list