Skip Content
MOTOR,3/4HP,D/D BLOWER close
close x

images.360.info.textHead1 360° images.360.info.textHead2

  1. images.360.info.text1
  2. images.360.info.text2
  3. images.360.info.text3

MOTOR,3/4HP,D/D BLOWER

DAYTON

http://catalogue.acklandsgrainger.com/2017?hybris=true
  • Item # GGE3LU88
  • Mfr. Model # 3LU88
  • UNSPSC # 26101601
  • CATALOGUE PAGE # 1501
  • Shipping Weight 20.7 lbs

Product Details

PSC Direct-Drive Blower/Fan Motors, 3/4 HP, Permanent Split Capacitor, Continuous Air-over Duty

Technical Specs

  • Full Load Amps 4.8-4.4
  • HP 3/4
  • Application High Efficiency Performance on Furnace Blowers and Other Air-Over Shaft-Mounted Fan and Blower Equipment
  • Item Direct Drive Blower Motor
  • Nameplate RPM 1,075
  • Phase 1
  • Capacitor Required Yes
  • Duty Continuous
  • Overall Length 12-15/16"
  • RPM Range 1001 - 1100
  • Hz 60
  • Shaft Length 6"
  • Voltage 208 - 230
  • Frame 48YZ
  • Body Dia. 5-5/8"
  • Shaft Dia. 1/2"
  • Max. Ambient Temp. 40 Degrees C
  • Ring to Ring Center 6-1/2"
  • No. of Speeds 4
  • Motor Sub Application Direct Drive Fan/Blower
  • Motor Application HVAC/R
  • Length Less Shaft 6-15/16"
  • Motor Service Factor 1.00
  • Motor Bearings Sleeve
  • Ins. Class B
  • Includes Split Rings to Increase Ring Diameter to 2 1/2"
  • Standards UL Component Recognition (E37403) and CSA Certification (258501)
  • Bolt Circle Dia. 5-1/8"
  • Motor Design Permanent Split Capacitor
  • Motor Mounting Type Stud
  • Resilient Ring Dia. 2-1/4"
  • Motor Mounting Position All Angle
  • Motor Enclosure Design Open Air-Over
  • Motor Thermal Protection Auto
  • Motor Shaft Design Double-Flat
  • Motor Shaft Rotation CW/CCW
  • Mounting Stud Pattern 3-5/8" x 3-5/8"
  • Voltage Compatibility 115/208-230, 208-230, 208-240

Compliance and Restrictions

  • None

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list