Window/Wall A/C & Heat Pump Accessories

This window mount kit is made of metal/plastic and measures 16 3/8 width x 32 1/4 height x 2 1/2 inches depth. It is suitable for use with small chassis heat models. The kit includes an insulated side-curtain panel, mounting brackets/hardware, and strip insulation.

This window mount kit is made of metal/plastic and measures 16 3/8 width x 32 1/4 height x 2 1/2 inches depth. It is suitable for use with small chassis heat models. The kit includes an insulated side-curtain panel, mounting brackets/hardware, and strip insulation.

This architectural grille is made of anodized aluminum. It measures 18 width x 2 height x 20 inches depth. It is suitable for use with Friedrich through the wall air conditioner wall sleeve WSE.

This architectural grille is made of anodized aluminum. It measures 18 width x 2 height x 20 inches depth. It is suitable for use with Friedrich through the wall air conditioner wall sleeve WSE.

This drain kit measures 2 width x 1 height x 31 inches depth. It is suitable for use with Wallmaster series Smart Thru-the-wall air conditioners. The drain kit is installed at the back of the unit, and allows for attachment to condensate disposal system, if necessary or desired.

This drain kit measures 2 width x 1 height x 31 inches depth. It is suitable for use with Wallmaster series Smart Thru-the-wall air conditioners. The drain kit is installed at the back of the unit, and allows for attachment to condensate disposal system, if necessary or desired.

This internal drain kit measures 4 width x 1 height x 5 inches depth and includes a drain for new construction with a condensate drain system in the wall. It is suitable for use with air conditioners. The kit collects water dripping from the air conditioner coils and directs it into a condensate drain line to prevent puddling around the AC unit.

This internal drain kit measures 4 width x 1 height x 5 inches depth and includes a drain for new construction with a condensate drain system in the wall. It is suitable for use with air conditioners. The kit collects water dripping from the air conditioner coils and directs it into a condensate drain line to prevent puddling around the AC unit.

This air conditioner filter is made of carbon and measures 19 1/2 width x 11 1/4 height x 1/8 inches depth. The air conditioner filter is suitable for use with EL36-3, EM24N34A, SL28-3, SL36-3, and SM24N30A window air conditioners. There are three carbon filters in a pack.

This air conditioner filter is made of carbon and measures 19 1/2 width x 11 1/4 height x 1/8 inches depth. The air conditioner filter is suitable for use with EL36-3, EM24N34A, SL28-3, SL36-3, and SM24N30A window air conditioners. There are three carbon filters in a pack.

This air conditioner filter is made of carbon and measures 17 1/2 width x 10 1/2 height x 1/8 inches depth. The air conditioner filter is suitable for use with EM18-3, SM18-3, and SM21-3 window air conditioners. There are three carbon filters in a pack.

This air conditioner filter is made of carbon and measures 17 1/2 width x 10 1/2 height x 1/8 inches depth. The air conditioner filter is suitable for use with EM18-3, SM18-3, and SM21-3 window air conditioners. There are three carbon filters in a pack.

This window mount kit is made of metal/plastic and measures 16 3/8 width x 32 1/4 height x 2 1/2 inches depth. It is suitable for use with large chassis heat models. The kit includes an insulated side-curtain panel, mounting brackets/hardware, and strip insulation.

This window mount kit is made of metal/plastic and measures 16 3/8 width x 32 1/4 height x 2 1/2 inches depth. It is suitable for use with large chassis heat models. The kit includes an insulated side-curtain panel, mounting brackets/hardware, and strip insulation.

This iWave-R bi-polar ionization purifier is made of plastic and has an ion output of 160 million ions/cc per feet. It has an operating temperature ranging from -40 to 160 degrees Fahrenheit and operates at 24V/260V AC, 50/60 Hz. It is suitable for use with VPAK units and meets the UL/cUL standards.

This iWave-R bi-polar ionization purifier is made of plastic and has an ion output of 160 million ions/cc per feet. It has an operating temperature ranging from -40 to 160 degrees Fahrenheit and operates at 24V/260V AC, 50/60 Hz. It is suitable for use with VPAK units and meets the UL/cUL standards.

This window-mount kit measures 20 4/5 width x 2 height x 28 5/16 inches depth. It is suitable for use with Q-chassis heat models. The kit includes a chassis gasket, flat weld nut, hex head screw, J speed nut, Masonite wing board, screw, sealing gasket, sheet metal screw, side wing board angle, steel wing board clip, support bracket, top wing board angle, and window gasket.

This window-mount kit measures 20 4/5 width x 2 height x 28 5/16 inches depth. It is suitable for use with Q-chassis heat models. The kit includes a chassis gasket, flat weld nut, hex head screw, J speed nut, Masonite wing board, screw, sealing gasket, sheet metal screw, side wing board angle, steel wing board clip, support bracket, top wing board angle, and window gasket.

This window mount kit is made of metal/plastic and measures 16 3/8 width x 32 1/4 height x 2 1/2 inches depth. It is suitable for use with medium chassis heat models. The kit includes an insulated side-curtain panel, mounting brackets/hardware, and strip insulation.

This window mount kit is made of metal/plastic and measures 16 3/8 width x 32 1/4 height x 2 1/2 inches depth. It is suitable for use with medium chassis heat models. The kit includes an insulated side-curtain panel, mounting brackets/hardware, and strip insulation.

This architectural grille is made of extruded brushed aluminum. It measures 25 15/16 width x 15 9/16 height x 1 13/16 inches depth. It is suitable for use with Friedrich Uni-Fit through the wall USC sleeve.

This architectural grille is made of extruded brushed aluminum. It measures 25 15/16 width x 15 9/16 height x 1 13/16 inches depth. It is suitable for use with Friedrich Uni-Fit through the wall USC sleeve.

This Vert-I-Pak single-stage wall-mounted wired thermostat with two fan speeds and a backlight has an operating voltage of 24V DC and is made of plastic. It measures 7 9/16 width x 5 11/16 height x 2 1/8 inches depth and is suitable for use with Friedrich packaged terminal air conditioner/vertical terminal air conditioner. The thermostat includes a mounting kit.

This Vert-I-Pak single-stage wall-mounted wired thermostat with two fan speeds and a backlight has an operating voltage of 24V DC and is made of plastic. It measures 7 9/16 width x 5 11/16 height x 2 1/8 inches depth and is suitable for use with Friedrich packaged terminal air conditioner/vertical terminal air conditioner. The thermostat includes a mounting kit.

This single-stage wireless thermostat with two fan speeds and a backlight has an operating voltage of 24V DC and is made of plastic. It measures 6 1/4 width x 3 3/4 height x 2 1/4 inches depth and is suitable for use with Friedrich packaged terminal air conditioner/vertical terminal air conditioner. The thermostat includes a mounting kit.

This single-stage wireless thermostat with two fan speeds and a backlight has an operating voltage of 24V DC and is made of plastic. It measures 6 1/4 width x 3 3/4 height x 2 1/4 inches depth and is suitable for use with Friedrich packaged terminal air conditioner/vertical terminal air conditioner. The thermostat includes a mounting kit.

This drain kit measures 1 width x 6 height x 8 inches depth and is suitable for use with all Friedrich Kuhl models.

This drain kit measures 1 width x 6 height x 8 inches depth and is suitable for use with all Friedrich Kuhl models.

This air conditioner filter is made of carbon and measures 17 1/4 width x 3 height x 1/8 inches depth. The air conditioner filter is suitable for use with ES12N-3, ES15-3, SS08M10, SS10M10, SS12, SS12-3, SS14, and SS15-3 window air conditioners. There are three carbon filters in a pack.

This air conditioner filter is made of carbon and measures 17 1/4 width x 3 height x 1/8 inches depth. The air conditioner filter is suitable for use with ES12N-3, ES15-3, SS08M10, SS10M10, SS12, SS12-3, SS14, and SS15-3 window air conditioners. There are three carbon filters in a pack.