Threadlockers for Metals

Gel Twist(TM) threadlocker will not drip or run like traditional liquid threadlockers. Threadlocker gel stays on the part which makes it great for vertical and overhead applications. Extended nozzle allows for easy applications in hard-to-reach locations.

Gel Twist(TM) threadlocker will not drip or run like traditional liquid threadlockers. Threadlocker gel stays on the part which makes it great for vertical and overhead applications. Extended nozzle allows for easy applications in hard-to-reach locations.

This thread locker is purple and comes in a 10 mL bottle. It meets the standards for NSF P1 Reg No: 123002, RoHs. This thread locker has a working time of 20 minutes, and has a threadlocking strength of low, and is no-drip.

This thread locker is purple and comes in a 10 mL bottle. It meets the standards for NSF P1 Reg No: 123002, RoHs. This thread locker has a working time of 20 minutes, and has a threadlocking strength of low, and is no-drip.

This series 262 threadlocker has a 24-hour full cure, 1800/5000 thixotropic viscosity, and is available in a six-millilitre tube. With a dimethacrylate ester chemical type, this high-strength threadlocker has one-point specific gravity and a flash point greater than 93.3C. It is removable with localized heat and compatible with 1/4 to 3/4-inch hardware.

This series 262 threadlocker has a 24-hour full cure, 1800/5000 thixotropic viscosity, and is available in a six-millilitre tube. With a dimethacrylate ester chemical type, this high-strength threadlocker has one-point specific gravity and a flash point greater than 93.3C. It is removable with localized heat and compatible with 1/4 to 3/4-inch hardware.

This high-lubricity and strength threadlocker is black and comes in a 1.69 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This threadlocker has a working time of 1.5 hours and has a threadlocking strength of high.

This high-lubricity and strength threadlocker is black and comes in a 1.69 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This threadlocker has a working time of 1.5 hours and has a threadlocking strength of high.

These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.

These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.

This series 2620 high-temperature threadlocker has a 24-hour full cure, 20,000 to 70,000 viscosity, and is available in a 30-gram syringe. With a dimethacrylate ester chemical type, this high-strength threadlocker has 1.16 specific gravity and is removable with localized heat and hand tools.

This series 2620 high-temperature threadlocker has a 24-hour full cure, 20,000 to 70,000 viscosity, and is available in a 30-gram syringe. With a dimethacrylate ester chemical type, this high-strength threadlocker has 1.16 specific gravity and is removable with localized heat and hand tools.

This low-strength threadlocker is purple and comes in a 1.69 fluid ounce bottle. It meets the standards for Mil-S-46163-A Type II Grade M. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and it meets mil spec.

This low-strength threadlocker is purple and comes in a 1.69 fluid ounce bottle. It meets the standards for Mil-S-46163-A Type II Grade M. This low-strength threadlocker has a working time of 20 minutes, and has a threadlocking strength of low, and it meets mil spec.

This high-strength threadlocker is red and comes in a 0.34 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of four minutes, and has a threadlocking strength of high.

This high-strength threadlocker is red and comes in a 0.34 fluid ounce bottle. It meets the standards for California Proposition 65, CEPA DSL/NDSL, CERCLA/SARA 311, CERCLA/SARA 312, CERCLA/SARA 313, OSHA 29 CFR 1910.1200, TSCA. This high-strength threadlocker has a working time of four minutes, and has a threadlocking strength of high.

These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.

These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.

These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.

These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.

This high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 45 minutes, and has a threadlocking strength of high, and is oil tolerant.

This high-strength threadlocker is red and comes in a 8.45 fluid ounce bottle. It meets the standards for ASTM D-5363, MIL-S-46163-A. This high-strength threadlocker has a working time of 45 minutes, and has a threadlocking strength of high, and is oil tolerant.

This thread locker is orange and comes in a 10 mL bottle. It meets the standards for ASTM D5363 AN0331, California Proposition 65, Grade O, Meets OEM Specifications, Mil-S46163A Type II. This thread locker has a working time of 20 minutes, and has a threadlocking strength of high, and is no-drip.

This thread locker is orange and comes in a 10 mL bottle. It meets the standards for ASTM D5363 AN0331, California Proposition 65, Grade O, Meets OEM Specifications, Mil-S46163A Type II. This thread locker has a working time of 20 minutes, and has a threadlocking strength of high, and is no-drip.

J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. J-B Weld Perma-lock Medium Strength Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools.

J-B Weld Threadlockers provide a reliable and superior lock and seal for threaded fasteners. Ideal on all mechanical parts, body assemblies, and hundreds of other applications to prevent loosening of fasteners from shock and vibration. J-B Weld Perma-lock Medium Strength Threadlocker is ideal for fastener applications requiring easy disassembly with hand tools.

This series 294 high-temperature threadlocker has a 24-hour full cure and is available in a 50-millilitre bottle. With an anaerobic chemical type, this threadlocker has 1.12 specific gravity and a flash point greater than 93.3C. It is removable with hand tools and localized heat.

This series 294 high-temperature threadlocker has a 24-hour full cure and is available in a 50-millilitre bottle. With an anaerobic chemical type, this threadlocker has 1.12 specific gravity and a flash point greater than 93.3C. It is removable with hand tools and localized heat.

These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.

These threadlockers work with metal fasteners to prevent loosening due to vibration. They fill the space between the threads of bolts and screws to hold them in place and form a barrier around the threads to prevent leaks, corrosion, and rust. Threadlockers are color-coded to represent their locking strength and other unique properties.