Filter Results By

Brand
Shop By

Threadlockers and Gasket Sealants

Thread and gasket sealants are primarily used when you need a tight seal around a connection point. They are typically offered in tape, lubricant or foam form. Plumbers and a variety of other professionals often use sealants when installing pipes and other utilities. Choose from a wide selection of sealants at Acklands-Grainger. Find the right solution for your tasks such as gasket sealants, valve sealants, pipe sealants, threadlockers and more.

http://catalogue.acklandsgrainger.com/2017?hybris=true

344 Results Found

Results per page :  16 | 32 | 48
  • LOCTITE
  • GASKET SILICONE SI 587 RTV BLUE 70 ML
  • Item # LCT58730
  • Mfr. Model # 58730
  • 587 high performance blue silicone maker forms tough, flexible gaskets directly on the flange. Resistant, low odor, non-corrosive, low volatility. Withstands temperatures to 260 degrees C (500 degrees F). Fills gaps to 0.25 in., 70 mL tube.

    View more View less
  • CATALOGUE PAGE # 1583
  • LOCTITE
  • SEAL SILICONE SI596 RED RTV HITEMP 80 ML
  • Item # LCT59630
  • Mfr. Model # 59630
  • Superflex red high temperature silicone adhesive sealant makes gaskets that resist temperatures to 315 degrees C (600 degrees F) intermittent. Resists aging, weather and thermal cycling without shrinking, cracking, or hardening. Fill gaps to .25 in.

    View more View less
  • CATALOGUE PAGE # 1583
  • LOCTITE
  • FLANGE SEALANT 515 300 ML
  • Item # LCT51580
  • Mfr. Model # 51580
  • 515 gasket flange sealant seals to 300 degrees F (149 degrees C) and fills gaps to 0.050 in. (1.27 mm) with primer. 300 ml cartridge.

    View more View less
  • CATALOGUE PAGE # 1583
  • LOCTITE
  • GASKET MKR SILICONE SI 598 BLK RTV 70 ML
  • Item # LCT59830
  • Mfr. Model # 59830
  • 598 black high performance gasket maker has a temperature range -59 degrees to +329 degrees C (-75 degrees to +625 degrees F) intermittent. Low odor, non-corrosive, low volatility and resistant to most chemicals and solvents, 70 mL tube.

    View more View less
  • CATALOGUE PAGE # N/A
  • LOCTITE
  • GASKET SI 5900 INSTANT 190 ML
  • Item # LCT40479
  • Mfr. Model # 40479
  • Instant gasket is economical with eight feet of gasket in every ounce. Return equipment to service immediately when you make leakproof gaskets in just one minute with instant gasket, 190 mL pressure can.

    View more View less
  • CATALOGUE PAGE # 1583
  • LOCTITE
  • THREADLOCKER 243 OIL TOLERANT 10 ML
  • Item # LCT1329837
  • Mfr. Model # 1329837
  • 243 removable theadlocker is a general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 10 mL bottle.

    View more View less
  • CATALOGUE PAGE # 1579
  • LOCTITE
  • THREAD SEALANT 545 HYDR/PNEU 50 ML
  • Item # LCT54531
  • Mfr. Model # 54531
  • 545 hydraulic thread sealant is designed for both hydraulic and pneumatic systems. Contains no fillers or particles which could contaminate system fluids, foul valves, or clog fine filters and screens. Suitable for fittings up to 2 in. (50 mm), 50 mL bottle.

    View more View less
  • CATALOGUE PAGE # 1581
  • LOCTITE
  • THREADLOCKER 248 MED STR STICK 19 G
  • Item # LCT37087
  • Mfr. Model # 37087
  • 248 medium strength threadlocker stick is best suited for 1/4 to 3/4 in. fasteners. Develops useable strength within 10 minutes and full strength after 24 hours. Semi-solid formula in a 19 gram stick.

    View more View less
  • CATALOGUE PAGE # 1579
  • LOCTITE
  • SEALANT SILICONE SI 595 CLEAR RTV 80 ML
  • Item # LCT59530
  • Mfr. Model # 59530
  • Superflex clear RTV silicone adhesive sealant is a general-purpose, one-part silicone adhesive sealant that cures at room temperature to form a tough rubber seal. Formulated to withstand extreme temperature cycling, UV light and ozone. 80 mL tube.

    View more View less
  • CATALOGUE PAGE # N/A
  • LOCTITE
  • SEALANT SILICONE SI 595 CLEAR RTV 300 ML
  • Item # LCT59575
  • Mfr. Model # 59575
  • Superflex clear RTV silicone adhesive sealant is a general-purpose, one-part silicone adhesive sealant that cures at room temperature to form a tough rubber seal. Formulated to withstand extreme temperature cycling, UV light and ozone. 300 mL cartridge.

    View more View less
  • CATALOGUE PAGE # N/A
  • LOCTITE
  • THREADLOCKER 290 WICKING MED STR 50 ML
  • Item # LCT29031
  • Mfr. Model # 29031
  • 291 penetrating threadlocker is a low viscosity threadlocking liquid, green 290 wicks along the threads of pre-assembled fasteners to secure them in place. For fasteners ranging from #2 to 1/2 in. (2.2 to 12 mm), 50 mL bottle.

    View more View less
  • CATALOGUE PAGE # 1579
  • LOCTITE
  • THREADLOCKER 242 MEDIUM STRENGTH 250 ML
  • Item # LCT24241
  • Mfr. Model # 24241
  • 242 removable threadlocker is a medium strength, general-purpose threadlocking adhesive especially well suited for fasteners between 1/4 in. and 3/4 in. diameter (6 to 20 mm). Applied to threaded components before assembly, 250 mL bottle.

    View more View less
  • CATALOGUE PAGE # 1579
  • PERMATEX
  • GASKET MAKER RIGHT STUFF CART
  • Item # PML30874
  • Mfr. Model # 30874
  • The Right Stuff(R) gasket maker. Heavy-bodied, black, elastometric rubber gasket. Superior flexibility and adhesion. Noncorrosive. Low odor. Low volatility. Used in OE assembly lines. Temperature range of -59 degrees C to 232 degrees C. Excellent oil and transmission fluid resistance.

    View more View less
  • CATALOGUE PAGE # 1584
Results per page :  16 | 32 | 48

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list