Solid Router Bits

This 60-100MW series compression spiral routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ½-inch shank diameter, ½-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 60-100MW series compression spiral routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ½-inch shank diameter, ½-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 56-000 series straight O-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, two flutes, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 56-000 series straight O-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ¼-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, two flutes, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 65-000 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, and 25 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

This 65-000 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, and 25 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¾-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

This 63-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¾-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, and 22 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

This 62-700 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1¼-inch cut length, ¼-inch shank diameter, three-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

This 62-700 series spiral O-flute downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1¼-inch cut length, ¼-inch shank diameter, three-inch overall length, and 21 degree helix angle. The right-hand single-routing end mill has center cutting and a fractional inch measurement system.

This 61-000P series straight spiral O-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ⅛-inch cutter diameter, ¼-inch shank diameter, four-inch overall length, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 61-000P series straight spiral O-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅝-inch cut length, ⅛-inch cutter diameter, ¼-inch shank diameter, four-inch overall length, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 56-000P series straight V-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, 2½-inch overall length, two flutes, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 56-000P series straight V-flute routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, 2½-inch overall length, two flutes, and zero degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ⅛-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ½-inch cut length, ⅛-inch shank diameter, ⅛-inch cutter diameter, two-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ½-inch shank diameter, ½-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1⅛-inch cut length, ½-inch shank diameter, ½-inch cutter diameter, three-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 2⅛-inch cut length, ½-inch shank diameter, ½-inch cutter diameter, four-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 57-200 series spiral downcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 2⅛-inch cut length, ½-inch shank diameter, ½-inch cutter diameter, four-inch overall length, two flutes, and 30 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 60-200 series spiral upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, three-inch overall length, three flutes, and 10 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 60-200 series spiral upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 7/8-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, three-inch overall length, three flutes, and 10 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 52-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅜-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, two flutes, and 11 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 52-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ⅜-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, two flutes, and 11 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 52-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¾-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, two flutes, and 11 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 52-600 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures ¾-inch cut length, ¼-inch shank diameter, ¼-inch cutter diameter, 2½-inch overall length, two flutes, and 11 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 52-700 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1½-inch cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, four-inch overall length, two flutes, and 22 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 52-700 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1½-inch cut length, ⅜-inch shank diameter, ⅜-inch cutter diameter, four-inch overall length, two flutes, and 22 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 65-000 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1¼-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, three-inch overall length, and 25 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.

This 65-000 series spiral O-flute upcut routing end mill is made of high-performance solid carbide with a bright finish. It measures 1¼-inch cut length, ¼-inch shank diameter, 3/16-inch cutter diameter, three-inch overall length, and 25 degree helix angle. The right-hand end mill has center cutting and a fractional inch measurement system.