Motors

HVAC 4.4 In diameter motor. Shaded pole. Open, 1/10 HP, 1550 RPM, 115 volts. Full load amps 3.3. NEMA frame non standard. Service factor 1.0. Ambient 40 deg. C, 60 Hz. Number of speeds 1. Insulation class B. Thermal protection auto. Rotation CW. Stud moun

HVAC 4.4 In diameter motor. Shaded pole. Open, 1/10 HP, 1550 RPM, 115 volts. Full load amps 3.3. NEMA frame non standard. Service factor 1.0. Ambient 40 deg. C, 60 Hz. Number of speeds 1. Insulation class B. Thermal protection auto. Rotation CW. Stud moun

Permanent magnet DC totally enclosed non-ventilated motor, HP 1/6, RPM 1800, armature DC voltage 90 VDC, mounting face/base, service factor 1.00, bearings ball, amps at nameplate volts 1.8, thermal protection none.

Permanent magnet DC totally enclosed non-ventilated motor, HP 1/6, RPM 1800, armature DC voltage 90 VDC, mounting face/base, service factor 1.00, bearings ball, amps at nameplate volts 1.8, thermal protection none.

Permanent magnet DC totally enclosed non-ventilated motor, HP 1/35, RPM 2350, armature DC voltage 12 VDC, mounting stud, service factor 1.00, bearings sleeve, amps at nameplate volts 3.8, thermal protection none.

Permanent magnet DC totally enclosed non-ventilated motor, HP 1/35, RPM 2350, armature DC voltage 12 VDC, mounting stud, service factor 1.00, bearings sleeve, amps at nameplate volts 3.8, thermal protection none.

PSC, oscillating air circulator, yoke-type, capacitor included. Body diameter 5-5/8 inches. Enclosure TEAO. Full load amps 3.5. HP 1/4. Insulation class B. Length 13-3/4 inches. Nameplate RPM 1,075. No. of speeds 2. Rotation facing shaft end CWSE. Shaft dim. 1/2 inch diameter x 2-7/8 inch length. Volts 60 Hz 115.

PSC, oscillating air circulator, yoke-type, capacitor included. Body diameter 5-5/8 inches. Enclosure TEAO. Full load amps 3.5. HP 1/4. Insulation class B. Length 13-3/4 inches. Nameplate RPM 1,075. No. of speeds 2. Rotation facing shaft end CWSE. Shaft dim. 1/2 inch diameter x 2-7/8 inch length. Volts 60 Hz 115.

DC speed control for 90 volt and 180 volt motor and gearmotor, 90 arm VDC, HP range 1/50-1/6, constant torque speed regulation percent nameplate RPM 10-30, NEMA 1 enclosure, height 5 inches, width 4-1/4 inches, depth 1-7/8 inches.

DC speed control for 90 volt and 180 volt motor and gearmotor, 90 arm VDC, HP range 1/50-1/6, constant torque speed regulation percent nameplate RPM 10-30, NEMA 1 enclosure, height 5 inches, width 4-1/4 inches, depth 1-7/8 inches.

DC speed controls for 90 volt and 180 volt motor and gearmotor, IR comp. fixed, HP range 1/50-1/6, speed regulation % nameplate RPM 10-30, chassis enclosure, height 4 inches, width 4 inches, depth 2 inches.

DC speed controls for 90 volt and 180 volt motor and gearmotor, IR comp. fixed, HP range 1/50-1/6, speed regulation % nameplate RPM 10-30, chassis enclosure, height 4 inches, width 4 inches, depth 2 inches.

Split-phase, open drip-proof, residential duty. Sleeve bearing. Full load amps 5.0. HP 1/4. Insulation class B. Nameplate RPM 1,725. NEMA frame 48Y. Service factor 1.35. Shaft dimension 1/2 inch diameter x 1-1/2 inches long. Volts 60 Hz 115.

Split-phase, open drip-proof, residential duty. Sleeve bearing. Full load amps 5.0. HP 1/4. Insulation class B. Nameplate RPM 1,725. NEMA frame 48Y. Service factor 1.35. Shaft dimension 1/2 inch diameter x 1-1/2 inches long. Volts 60 Hz 115.

Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24VDC, Max. RPM 5000, Output Cable Length (Ft.) 6, 3 Wire 18 AWG, Ball Bearings, Operating Temp. -10 to 45 Degree C, Molded Santoprene Rubber Housing

Pulse Generator, Provides Current Sinking Square-wave Pulses with Frequency Proportional to Shaft RPM of Unit to Which It is Mounted, Pick-up Mounts with a #10-32 Screw Directly to Motor Shaft Being Monitored, 10 Pulses per Revolution, Input Voltage 4.5 to 24VDC, Max. RPM 5000, Output Cable Length (Ft.) 6, 3 Wire 18 AWG, Ball Bearings, Operating Temp. -10 to 45 Degree C, Molded Santoprene Rubber Housing

Motor run capacitor, EIA UL Base A, 1/4 inch male terminals, temperature range -40 to 69 degrees C.

Motor run capacitor, EIA UL Base A, 1/4 inch male terminals, temperature range -40 to 69 degrees C.

Split-phase, yoke-type welded tab. Body diameter 5-5/8 inches. Enclosure TEAO. Full load amps 6.4. HP 1/2. Insulation class B. Length 10-1/8 inches. Nameplate RPM 1,725. No. of speeds 1. Rotation facing shaft end CW/CCW. Shaft dimensions 5/8 inch diameter x 2 inch length. Volts 60 Hz 115.

Split-phase, yoke-type welded tab. Body diameter 5-5/8 inches. Enclosure TEAO. Full load amps 6.4. HP 1/2. Insulation class B. Length 10-1/8 inches. Nameplate RPM 1,725. No. of speeds 1. Rotation facing shaft end CW/CCW. Shaft dimensions 5/8 inch diameter x 2 inch length. Volts 60 Hz 115.