Jigsaw Blades

This jigsaw blade is made of HSS and measures 4 length x 0.34 height x 0.04 inch thickness with a three inches working length. It has a side set/ground, T-shank, and fast-cuts. The blade has 10 to 24 TPI that cuts sheet metal up to eight gauge, stainless steel, non-ferrous metal, plastics, and fibreglass. There are five blades in a pack.

This jigsaw blade is made of HSS and measures 4 length x 0.34 height x 0.04 inch thickness with a three inches working length. It has a side set/ground, T-shank, and fast-cuts. The blade has 10 to 24 TPI that cuts sheet metal up to eight gauge, stainless steel, non-ferrous metal, plastics, and fibreglass. There are five blades in a pack.

This heavy-duty bi-metal jigsaw blade measures 3 length x ¼ inch width. It has a metal tip, a T-shank, milled/wavy teeth, and a rigid cutting-edge for straight-cuts. The thick metal-cutting blade has 24 TPI that cuts metal under ⅛ inch thickness. There are five blades in a pack.

This heavy-duty bi-metal jigsaw blade measures 3 length x ¼ inch width. It has a metal tip, a T-shank, milled/wavy teeth, and a rigid cutting-edge for straight-cuts. The thick metal-cutting blade has 24 TPI that cuts metal under ⅛ inch thickness. There are five blades in a pack.

This heavy-duty bi-metal jigsaw blade measures 4 length x 9/32 width x 0.05 inch thickness. It has a T-shank and milled teeth. The general-purpose blade has 10 TPI that cuts nail-embedded wood. There are five blades in a pack.

This heavy-duty bi-metal jigsaw blade measures 4 length x 9/32 width x 0.05 inch thickness. It has a T-shank and milled teeth. The general-purpose blade has 10 TPI that cuts nail-embedded wood. There are five blades in a pack.

This general-purpose jigsaw blade set contains five cobalt steel T-shank blades. It includes a premium medium metal-cutting blade, a fast-cut wood-cutting blade, a fine-cut wood-cutting blade, a down-cut wood-cutting blade, and a clean-cut wood-cutting blade.

This general-purpose jigsaw blade set contains five cobalt steel T-shank blades. It includes a premium medium metal-cutting blade, a fast-cut wood-cutting blade, a fine-cut wood-cutting blade, a down-cut wood-cutting blade, and a clean-cut wood-cutting blade.

This bi-metal/high-speed steel jigsaw blade set with T-shank includes three metal-cutting blades with 18/14/10 TPI that measure three inches length and two general-purpose blades with 24/6 TPI that measure four inches length. The blade set with a bi-metal-cutting-edge has a 9/32 inch width and is suitable for use with metal/wood.

This bi-metal/high-speed steel jigsaw blade set with T-shank includes three metal-cutting blades with 18/14/10 TPI that measure three inches length and two general-purpose blades with 24/6 TPI that measure four inches length. The blade set with a bi-metal-cutting-edge has a 9/32 inch width and is suitable for use with metal/wood.

This heavy-duty bi-metal jigsaw blade measures 5¼ length x 9/32 width x 0.1 inch thickness. It has a T-shank and milled/wavy teeth. The metal-cutting blade has 24 TPI that cuts thin metal under ⅛ inch thickness. There are five blades in a pack.

This heavy-duty bi-metal jigsaw blade measures 5¼ length x 9/32 width x 0.1 inch thickness. It has a T-shank and milled/wavy teeth. The metal-cutting blade has 24 TPI that cuts thin metal under ⅛ inch thickness. There are five blades in a pack.

This bi-metal jigsaw blade measures 3⅝ length x 0.3 height x 0.04 inch thickness with a 2 ⅝ inches working length. It has a wavy set/milled teeth, T-shank, and straight-cuts. The blade has 11 to 14 TPI that cuts medium to thin metals ⅛ to¼ inch thickness. There are five blades in a pack.

This bi-metal jigsaw blade measures 3⅝ length x 0.3 height x 0.04 inch thickness with a 2 ⅝ inches working length. It has a wavy set/milled teeth, T-shank, and straight-cuts. The blade has 11 to 14 TPI that cuts medium to thin metals ⅛ to¼ inch thickness. There are five blades in a pack.

This jigsaw blade is made of high-speed steel and measures 3⅝ length x 0.3 height x 0.04 inch thickness with a 2 ⅝ inches working length. It has a wavy set/milled teeth and T-shank. The blade has 11 to 14 TPI that cuts medium to thin metals ⅛ to¼ inch thickness.

This jigsaw blade is made of high-speed steel and measures 3⅝ length x 0.3 height x 0.04 inch thickness with a 2 ⅝ inches working length. It has a wavy set/milled teeth and T-shank. The blade has 11 to 14 TPI that cuts medium to thin metals ⅛ to¼ inch thickness.

This shatter-resistant bi-metal jigsaw blade measures 5¼ length x ⅜ x 0.050 inch. It has a T-shank, a milled tooth, and fast-cuts. The blade has six TPI that cuts wood. There are two blades in a pack.

This shatter-resistant bi-metal jigsaw blade measures 5¼ length x ⅜ x 0.050 inch. It has a T-shank, a milled tooth, and fast-cuts. The blade has six TPI that cuts wood. There are two blades in a pack.

This bi-metal jigsaw blade measures 3¼ length x 0.36 height x 0.05 inch thickness with a 2¼ inches working length. It has wavy set/milled, T-shank, and straight-cuts. The blade has 36 TPI that cuts 8 to 26 gauge stainless steel. There are five blades in a pack.

This bi-metal jigsaw blade measures 3¼ length x 0.36 height x 0.05 inch thickness with a 2¼ inches working length. It has wavy set/milled, T-shank, and straight-cuts. The blade has 36 TPI that cuts 8 to 26 gauge stainless steel. There are five blades in a pack.

This bi-metal jigsaw blade measures 3⅝ length x 0.3 height x 0.04 inch thickness with a 2 ⅝ inches working length. It has milled teeth, T-shank, and straight-cuts. The blade has 17 to 24 TPI that cuts sheet metal 10 to 16 gauge, ferrous, and non-ferrous metals 1/16 to ⅛ inch thickness. There are five blades in a pack.

This bi-metal jigsaw blade measures 3⅝ length x 0.3 height x 0.04 inch thickness with a 2 ⅝ inches working length. It has milled teeth, T-shank, and straight-cuts. The blade has 17 to 24 TPI that cuts sheet metal 10 to 16 gauge, ferrous, and non-ferrous metals 1/16 to ⅛ inch thickness. There are five blades in a pack.

This jigsaw blade is made of high-carbon steel and measures 4 length x 0.06 inch thickness. It has precision-ground teeth, T-shank, a metal tip and a rigid cutting-edge for straight-cuts. The solid stock blade has 10 TPI for cutting softwood and non-abrasive woodworking materials. There are five blades in a pack.

This jigsaw blade is made of high-carbon steel and measures 4 length x 0.06 inch thickness. It has precision-ground teeth, T-shank, a metal tip and a rigid cutting-edge for straight-cuts. The solid stock blade has 10 TPI for cutting softwood and non-abrasive woodworking materials. There are five blades in a pack.

This jigsaw blade is made of carbon steel and measures 4 length x 0.3 height x 0.05 inch thickness with a three inches working length. It has side set/milled teeth and T-shank. The blade has eight TPI for fast, coarse cuts in softwood, OSB and plywood 7/32 to 2 ⅜ inches thickness. There are five blades in a pack.

This jigsaw blade is made of carbon steel and measures 4 length x 0.3 height x 0.05 inch thickness with a three inches working length. It has side set/milled teeth and T-shank. The blade has eight TPI for fast, coarse cuts in softwood, OSB and plywood 7/32 to 2 ⅜ inches thickness. There are five blades in a pack.

This bi-metal jigsaw blade measures 4 length x 5/16 inch width. It has a T-shank and precision ground-reinforced teeth. The fine-cut smooth finish blade has 10 TPI that cuts wood. There are five blades in a pack.

This bi-metal jigsaw blade measures 4 length x 5/16 inch width. It has a T-shank and precision ground-reinforced teeth. The fine-cut smooth finish blade has 10 TPI that cuts wood. There are five blades in a pack.

This jigsaw blade is made of high-carbon steel and measures 4 length x 0.28 height x 0.06 inch thickness with a three inches working length. It has ground teeth, a taper ground back, and T-shank. The blade has 10 TPI for cutting in hard and softwood, plywood, plastics, OSB, and laminated particle board. There are five blades in a pack.

This jigsaw blade is made of high-carbon steel and measures 4 length x 0.28 height x 0.06 inch thickness with a three inches working length. It has ground teeth, a taper ground back, and T-shank. The blade has 10 TPI for cutting in hard and softwood, plywood, plastics, OSB, and laminated particle board. There are five blades in a pack.

This heavy-duty bi-metal jigsaw blade measures 5¼ length x 9/32 inch width. It has a T-shank, milled/raker teeth, a straight back, and a high-speed steel cutting-edge. The metal-cutting blade has 14 TPI that cuts thick metal such as metal tubing. There are five blades in a pack.

This heavy-duty bi-metal jigsaw blade measures 5¼ length x 9/32 inch width. It has a T-shank, milled/raker teeth, a straight back, and a high-speed steel cutting-edge. The metal-cutting blade has 14 TPI that cuts thick metal such as metal tubing. There are five blades in a pack.