!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.

Filter Results By

Shop By
Brand
Price
Weight Capacity
Workers per System
Horizontal Lifeline Component
ANSI Standards Met
Standards
Lifeline Length
Lifeline Installation
Includes
Lifeline Material
Mounting Type
Hardware Material
Mounting Location
For Use With

Horizontal Lifelines

Horizontal lifelines connect between two anchor points to provide an attachment for a personal fall protection system. Horizontal lifelines can be installed overhead, at foot level, or at any level between. One or more workers attach a lanyard or self-retracting lifeline (SRL) to move freely between anchor points, providing more freedom of movement than a single anchor point. Horizontal lifelines are used when working on beams and concrete walls or near leading edges. They can be set up for temporary use or installed for permanent use and they can be customized for specific locations and tasks. Lifelines are used with anchors and accessories of the same brand and series.

https://catalogue.grainger.ca/2023?hybris=true

89 Results Found

In stock at branch(0)
Results per page :  16 | 32 | 48
  • DBI-SALA
  • ENERGY ABSORBER, ANCHOR LIFELINE, 310 LB CAPACITY, STAINLESS STEEL, HORIZONTAL SYSTEM
  • Item # DBI7401013
  • Mfr. Model # 7401013
  • EHC: EHC :
  • This horizontal lifeline energy absorber has stainless steel hardware. Horizontal lifelines connect between two anchor points to provide an attachment for a personal fall protection system. Horizontal lifelines can be installed overhead, at foot level, or at any level between.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DBI-SALA
  • LIFELINE, SINGLE/MULTI SPAN, 40 FT LENGTH, REUSABLE, ANCHOR LIFELINE, STEEL
  • Item # DBI7403040
  • Mfr. Model # 7403040
  • EHC: EHC :
  • This horizontal lifeline system includes steel hardware. It includes metal energy absorber, tensioner, and termination. It also meets the standards for OSHA. Horizontal lifelines connect between two anchor points to provide an attachment for a personal fall protection system and can be installed overhead, at foot level, or at any level between.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • TRACTEL
  • HORIZONTAL LIFELINE KIT, 3 WORKER, 12000 LB TENSILE STRENGTH, 250 FT, WIRE/STAINLESS STEEL/COPPER
  • Item # TRAJK-SPSEA3-250
  • Mfr. Model # JK-SPSEA3-250
  • EHC: EHC :
  • This 250-foot horizontal lifeline kit is made for use with a harness and lanyard and includes an end anchor, a tension indicator, an energy-absorber, a turnbuckle, intermediate support, a wedge socket, a corner kit, and a cable. It has a wire rope and stainless steel, copper, and aluminum hardware. It has a three worker capacity, a weight capacity of 310 pounds, and a tensile strength of 12,000 pounds. It attaches to a structure and meets CSA standards.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DBI-SALA
  • HORIZONTAL LIFELINE SYSTEM, 80 FT LENGTH, REUSABLE, ANCHORAGE CONNECTORS, STEEL
  • Item # DBI7602080
  • Mfr. Model # 7602080
  • EHC: EHC :
  • This horizontal lifeline system is made with steel hardware and steel. It includes cable lifeline assembly with wedge grip termination, shock absorber, tensioner. It also meets the standards for OSHA. This horizontal lifeline system is designed for two workers, has a 310-pound weight capacity.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • TRACTEL
  • LIFELINE, 1 WORKER, 400 FT ROPE, 2 1/4 IN HOOK, 310 LB CAPACITY, STEEL/PLASTIC
  • Item # TRAGS400NH
  • Mfr. Model # GS400NH
  • EHC: EHC :
  • This lifeline features a 400-foot synthetic rope and a 2 1/4-inch snap hook. It has a one worker capacity and attaches to an anchor point. It has a weight limit of 310 pounds and a tensile strength of 11,500 pounds. This lifeline is made of steel and plastic and meets CSA standards.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DBI
  • LIFELINE, 2 WORKER, 5000 LB TENSILE STRENGTH, 310 LB CAPACITY, 100 FT, ALLOY STEEL
  • Item # DBI7600709
  • Mfr. Model # 7600709
  • EHC: EHC :
  • This 100-foot lifeline includes a tensioner, two tie-off adaptors, and a carry bag. It has a kernmantle rope and plated alloy steel hardware. It has a two worker capacity, a tensile strength of 5000 pounds, and a weight capacity of 310 pounds. It attaches to a structural anchor point and is made for use with an SRL or lanyard.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DBI
  • LIFELINE, 2 WORKER, 5000 LB TENSILE STRENGTH, 310 LB CAPACITY, 90 FT, ALLOY STEEL
  • Item # DBI7600708
  • Mfr. Model # 7600708
  • EHC: EHC :
  • This 90-foot lifeline includes a tensioner, two tie-off adaptors, and a carry bag. It has a kernmantle rope and plated alloy steel hardware. It has a two worker capacity, a tensile strength of 5000 pounds, and a weight capacity of 5000 pounds. It attaches to a structural anchor point and is made for use with an SRL or lanyard.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DBI
  • LIFELINE, 2 WORKER, 5000 LB TENSILE STRENGTH, 310 LB CAPACITY, 80 FT, ALLOY STEEL
  • Item # DBI7600707
  • Mfr. Model # 7600707
  • EHC: EHC :
  • This 80-foot lifeline includes a tensioner, two tie-off adaptors, and a carry bag. It has a kernmantle rope and plated alloy steel hardware. It has a two worker capacity, a tensile strength of 5000 pounds, and a weight capacity of 5000 pounds. It attaches to a structural anchor point and is made for use with an SRL or lanyard.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DBI
  • LIFELINE, 2 WORKERS, 5000 LB TENSION, 310 LBS CAPACITY, 30 FT, KERMANTLE/PLATED ALLOY STEEL
  • Item # DBI7600702
  • Mfr. Model # 7600702
  • EHC: EHC :
  • The 30-foot DBI-SALA Sayfline lifeline rope is made of kermantle with plated alloy steel hardware. It comes with a tensioner, two six-foot tie-off adapters, and a carry bag. This lifeline has a tensile strength of 5000 pounds and a weight capacity of 310 pounds. The lifeline attaches to a structural anchorage point with a minimum of 3,600-pound capacity and can handle two workers per system.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DBI
  • LIFELINE, 2 WORKER, 5000 LB TENSILE STRENGTH, 310 LB CAPACITY, 60 FT, ALLOY STEEL
  • Item # DBI7600705
  • Mfr. Model # 7600705
  • EHC: EHC :
  • This 60-foot lifeline includes a tensioner, two tie-off adaptors, and a carry bag. It has a kernmantle rope and plated alloy steel hardware. It has a two worker capacity, a tensile strength of 5000 pounds, and a weight capacity of 5000 pounds. It attaches to a structural anchor point and is made for use with an SRL or lanyard.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DBI-SALA
  • LIFELINE, SINGLE/MULTI SPAN, 30 FT LENGTH, REUSABLE, ANCHORAGE CONNECTORS, STEEL
  • Item # DBI7403030
  • Mfr. Model # 7403030
  • EHC: EHC :
  • This horizontal lifeline system cable assembly is made out of steel. It includes tensioner, termination, zorbit energy absorber. Horizontal lifelines connect between two anchor points to provide an attachment for a personal fall protection system and can be installed overhead, at foot level, or at any level between.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • DBI-SALA
  • BRACKET, WELDMENT, POUR IN PLACE STANCH, PERMANENT, CONCRETE, PIP POST
  • Item # DBI7400200
  • Mfr. Model # 7400200
  • EHC: EHC :
  • This Intermediate bracket has zinc plated steel hardware. Horizontal lifelines connect between two anchor points to provide an attachment for a personal fall protection system. Horizontal lifelines can be installed overhead, at foot level, or at any level between.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • HONEYWELL MILLER
  • HORIZONTAL LIFELINE KIT, 30 FT LENGTH, PERMANENT, VERTICAL STRUCTURES, 30FT
  • Item # MLRSG416FS/30FT
  • Mfr. Model # SG416FS/30FT
  • EHC: EHC :
  • This horizontal lifeline kit has stainless steel hardware. It includes two d-bolt stainless steel anchorage connectors, anchor shackle, cable clips, fast attach fitting, shock absorber, and thimble. It also meets the standards for ANSI, CSA, and OSHA. This kit is designed for two workers, has a 310-pound weight capacity, and includes mounting hardware.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • HONEYWELL MILLER
  • HORIZONTAL LIFELINE, 240 FT LENGTH, TEMPORARY, ANCHORAGE, CLAMP-ON, STEEL
  • Item # MLRX00240
  • Mfr. Model # X00240
  • EHC: EHC :
  • This horizontal lifeline is silver and is made with steel hardware and stainless steel. It also meets the standards for ANSI, CSA, and OSHA. This horizontal lifeline is designed for one worker and is for use with i-beam. It has a 310-pound weight capacity.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • HONEYWELL MILLER
  • HORIZONTAL LIFELINE, 300 FT LENGTH, TEMPORARY, ANCHORAGE, TIE-OFF, STEEL, BEAM
  • Item # MLRX00180
  • Mfr. Model # X00180
  • EHC: EHC :
  • This horizontal lifeline is silver and is made with steel hardware and steel. It includes cable, energy absorber, line tension indicator, stanchions, and turnbuckle. It also meets the standards for ANSI, CSA, and OSHA. This horizontal lifeline is designed for six workers, is for use with i-beam. It has a 310-pound weight capacity and includes mounting hardware.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MSA
  • HORIZONTAL LIFELINE, 100 FT L, TEMPORARY, LIFELINE, TIE-OFF, BYPASS SHUTTLES, STEEL
  • Item # MSA10219290
  • Mfr. Model # 10219290
  • EHC: EHC :
  • This horizontal lifeline is made out of steel and PTFE with stainless steel hardware. It includes bypass shuttles. It also meets the standards for OSHA 1926.502, OSHA 29 CFR 1910.140. Horizontal lifelines connect between two anchor points to provide an attachment for a personal fall protection system and can be installed overhead, at foot level, or at any level between.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Results per page :  16 | 32 | 48

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list