Head protection products provide protection against impacts to the head which can cause neck, head, and spinal injuries. Head lamps, tethers, and chinstraps are used to customize hard hats for a specific task at hand. Helmets and hard hats are worn when OSHA mandates head protection to protect workers from stationary or falling objects, while bump caps protect against scrapes or other minor injuries caused by walking or bumping into stationary objects. Head protection is worn by warehouse workers, electrical and construction workers, roadside crews, inspectors, landscapers, and more.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in green. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in green. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in orange. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in orange. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Peak hard hat with Strongco logo comes in white. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 1, Class E standard. This hard hat has a four-point nylon web ratchet suspension with slots for accessories.
This Peak hard hat with Strongco logo comes in white. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 1, Class E standard. This hard hat has a four-point nylon web ratchet suspension with slots for accessories.
This Matterhorn front brim hard hat with foam liner and City of Kingston logo fits head sizes 6 1/2 to 8 and comes in orange. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a four-point ratchet suspension with slots for accessories.
This Matterhorn front brim hard hat with foam liner and City of Kingston logo fits head sizes 6 1/2 to 8 and comes in orange. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a four-point ratchet suspension with slots for accessories.
This Zone front brim hard hat fits head sizes 6 3/4 to 7 3/8 and comes in white. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point pinlock suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 3/4 to 7 3/8 and comes in white. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point pinlock suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in yellow. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in yellow. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 3/4 to 7 3/8 and comes in yellow. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point pinlock suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 3/4 to 7 3/8 and comes in yellow. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point pinlock suspension with side slots for accessories.
This Peak hard hat with Aecon logo comes in white. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 1, Class E standard. This hard hat has a four-point nylon web ratchet suspension with slots for accessories.
This Peak hard hat with Aecon logo comes in white. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 1, Class E standard. This hard hat has a four-point nylon web ratchet suspension with slots for accessories.
This Matterhorn front brim hard hat with foam liner and Schlumberger logo fits head sizes 6 1/2 to 8 and comes in green. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a four-point ratchet suspension with slots for accessories.
This Matterhorn front brim hard hat with foam liner and Schlumberger logo fits head sizes 6 1/2 to 8 and comes in green. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a four-point ratchet suspension with slots for accessories.
This Matterhorn front brim hard hat with foam liner and Hatch logo fits head sizes 6 1/2 to 8 and comes in white. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a four-point ratchet suspension with slots for accessories.
This Matterhorn front brim hard hat with foam liner and Hatch logo fits head sizes 6 1/2 to 8 and comes in white. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a four-point ratchet suspension with slots for accessories.
This Everest full brim hard hat with Tervita logo fits head sizes 6 1/2 to 8 and comes in grey. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a six-point nylon ratchet suspension with slots for accessories.
This Everest full brim hard hat with Tervita logo fits head sizes 6 1/2 to 8 and comes in grey. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a six-point nylon ratchet suspension with slots for accessories.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in white. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in white. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in red. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 1/2 to 8 and comes in red. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point ratchet suspension with side slots for accessories.
This Matterhorn front brim hard hat with foam liner and Flynn logo fits head sizes 6 1/2 to 8 and comes in white. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a four-point ratchet suspension with slots for accessories.
This Matterhorn front brim hard hat with foam liner and Flynn logo fits head sizes 6 1/2 to 8 and comes in white. It is made of high density polyethylene and meets the CSA Z94.1-2005, Type 2, Class E standard. This hard hat has a four-point ratchet suspension with slots for accessories.
This Zone front brim hard hat fits head sizes 6 3/4 to 7 3/8 and comes in green. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point pinlock suspension with side slots for accessories.
This Zone front brim hard hat fits head sizes 6 3/4 to 7 3/8 and comes in green. It is made of polyethylene and meets the CSA Z94.1-2015, Type 1, Class C, E, and G standards. The hard hat has a four-point pinlock suspension with side slots for accessories.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.