Load-Bearing Structural Adhesives

This quick-drying rubber and gasket adhesive is flexible and fuel- and oil-resistant. This Scotch(R)-grip adhesive is curable with heat and has a viscosity of 1,500 to 3,200 centipoise. This adhesive meets WHMIS and cpsR-approved.

This quick-drying rubber and gasket adhesive is flexible and fuel- and oil-resistant. This Scotch(R)-grip adhesive is curable with heat and has a viscosity of 1,500 to 3,200 centipoise. This adhesive meets WHMIS and cpsR-approved.

This KWIKWELD epoxy adhesive is grey and comes in a syringe. It meets the standards for OSHA 29 CFR 1910.1200. This epoxy adhesive includes resin and hardener. In addition, it is for use with automotive, it has a working time of 6 minutes and has a tensile strength of 3127 psi, and is water-resistant.

This KWIKWELD epoxy adhesive is grey and comes in a syringe. It meets the standards for OSHA 29 CFR 1910.1200. This epoxy adhesive includes resin and hardener. In addition, it is for use with automotive, it has a working time of 6 minutes and has a tensile strength of 3127 psi, and is water-resistant.

5-minute epoxy is a rapid-curing, general purpose adhesive/encapsulant. Bonds metals, ceramics, glass, concrete, and wood, 50 mL cartridge.

5-minute epoxy is a rapid-curing, general purpose adhesive/encapsulant. Bonds metals, ceramics, glass, concrete, and wood, 50 mL cartridge.

This fast-drying Scotch(R)-grip plastic adhesive is excellent for fuel- and oil-resistance. With a viscosity of 2000 to 4000 centipoise, this adhesive resists weathering, water, and oil and can be heat cured for higher performance.

This fast-drying Scotch(R)-grip plastic adhesive is excellent for fuel- and oil-resistance. With a viscosity of 2000 to 4000 centipoise, this adhesive resists weathering, water, and oil and can be heat cured for higher performance.

Loctite(R) H8000(TM) Speedbonder(TM). Structural adhesive. A medium fixture time, high performance adhesive with excellent peel strength on multiple substrates, especially aluminum. 50 mL.

Loctite(R) H8000(TM) Speedbonder(TM). Structural adhesive. A medium fixture time, high performance adhesive with excellent peel strength on multiple substrates, especially aluminum. 50 mL.

This DP420 epoxy adhesive is black and comes in a dual-cartridge. It meets the standards for UL 94 HB. This epoxy adhesive features environmental resistance, high peel strength and includes resin and hardener. In addition, it is for use with applicator, mixing tip, it has a working time of 20 minutes and has a tensile strength of 4,500 psi. It is not water-resistant.

This DP420 epoxy adhesive is black and comes in a dual-cartridge. It meets the standards for UL 94 HB. This epoxy adhesive features environmental resistance, high peel strength and includes resin and hardener. In addition, it is for use with applicator, mixing tip, it has a working time of 20 minutes and has a tensile strength of 4,500 psi. It is not water-resistant.

J-B Weld MarineWeld is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld sets in 4-6 hours and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters' surface. MarineWeld has a tensile strength of 5020 PSI.

J-B Weld MarineWeld is a specially formulated two-part epoxy cold weld system that provides for strong, lasting repairs for bonding different or similar surfaces, such as aluminum, metal, composites, fiberglass and others. MarineWeld sets in 4-6 hours and is fully cured to a dark grey color in 15-24 hours. Once cured, it can be shaped, tapped, filed, sanded and drilled and will retain its strength above or below the waters' surface. MarineWeld has a tensile strength of 5020 PSI.

J-B Weld PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life: functional cure occurs in 2-3 hours. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first.

J-B Weld PlasticWeld is a hand-mixable, fast-setting epoxy putty that forms a durable bond to most plastic types. After mixing, it forms a polymer compound that can be molded or used to build up and repair just about anything made from plastic. When cured, it can be sawed, drilled, carved, sanded and painted. PlasticWeld has a 20-25 minute work life: functional cure occurs in 2-3 hours. Does not adhere to polyethylene, polypropylene or some other plastics. Test for adhesion first.

J-B Weld Plastic Bonder Black Syringe is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a black color and cures to a hard, permanent bond.

J-B Weld Plastic Bonder Black Syringe is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fiber composites, thermoplastics, coated metals, concrete & more. Plastic Bonder has a 1:1 mixing ratio, sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI, Plastic Bonder sets to a black color and cures to a hard, permanent bond.

J-B Weld MinuteWeld Syringe is a special formulated, high-strength, two-part instant setting epoxy. MinuteWeld will set under most temperature conditions in one minute. MinuteWeld is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal.

J-B Weld MinuteWeld Syringe is a special formulated, high-strength, two-part instant setting epoxy. MinuteWeld will set under most temperature conditions in one minute. MinuteWeld is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal.

This E-05MR epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM D792, ISO 11359-2, ISO 13445, ISO 4587, ISO 527-3, ISO 868, ISO 9653. This epoxy adhesive features high strength on a wide range of substrates, impact resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 7,240 psi.

This E-05MR epoxy adhesive is clear and comes in a dual-cartridge. It meets the standards for ASTM D792, ISO 11359-2, ISO 13445, ISO 4587, ISO 527-3, ISO 868, ISO 9653. This epoxy adhesive features high strength on a wide range of substrates, impact resistant and includes resin and hardener. In addition, it has a working time of five minutes and has a tensile strength of 7,240 psi.

This general-purpose, water-resistant dries to a strong, flexible, and transparent film. With low viscosity, this adhesive provides a strong bond to metals and plastics. This adhesive has a temperature range of -20 Degrees C to 80 Degrees C.

This general-purpose, water-resistant dries to a strong, flexible, and transparent film. With low viscosity, this adhesive provides a strong bond to metals and plastics. This adhesive has a temperature range of -20 Degrees C to 80 Degrees C.

J-B Weld MarineWeld is a specially formulated two-part adhesive system that provides strong, lasting repairs for bonding different or similar surfaces, such as metal, SMC fiberglass and others. At room temperature, MarineWeld sets in 5 minutes and will be white at full cure. It may then be tapped, filed, sanded and drilled, retaining full strength above or below the water's surface. MarineWeld ha a 1:1 mixing ratio and tensile strength of 2350 PSI.

J-B Weld MarineWeld is a specially formulated two-part adhesive system that provides strong, lasting repairs for bonding different or similar surfaces, such as metal, SMC fiberglass and others. At room temperature, MarineWeld sets in 5 minutes and will be white at full cure. It may then be tapped, filed, sanded and drilled, retaining full strength above or below the water's surface. MarineWeld ha a 1:1 mixing ratio and tensile strength of 2350 PSI.

This DP420 epoxy adhesive is Off-White and comes in a dual-cartridge. It meets the standards for UL 94 HB. This epoxy adhesive features environmental resistance, high peel strength and includes resin and hardener. In addition, it is for use with applicator, mixing tip, it has a working time of 20 minutes and has a tensile strength of 4,500 psi. It is not water-resistant.

This DP420 epoxy adhesive is Off-White and comes in a dual-cartridge. It meets the standards for UL 94 HB. This epoxy adhesive features environmental resistance, high peel strength and includes resin and hardener. In addition, it is for use with applicator, mixing tip, it has a working time of 20 minutes and has a tensile strength of 4,500 psi. It is not water-resistant.

This J-B Weld epoxy adhesive is grey in colour and comes in a syringe. It meets the standards for 29 CFR 1910.1200. This epoxy adhesive has a working time of 4 to six hours.

This J-B Weld epoxy adhesive is grey in colour and comes in a syringe. It meets the standards for 29 CFR 1910.1200. This epoxy adhesive has a working time of 4 to six hours.