!
Browser upgrade recommended: Improve your Grainger.ca experience by upgrading your browser to Edge or Chrome. Learn more about our supported browsers.

Filter Results By

Shop By
Brand
Blade Dia.
Blade Side
Max. Cutting Depth @ 0 Deg.
Max. Cutting Depth @ 45 Deg.
Bevel Angle Range
Arbor Size
Drive Type
Current

Corded Circular Saws

Corded circular saws are used to make cross, rip, and beveled cuts in wood and metal stock, such as when framing and cutting metal panels. Corded saws plug into an outlet to provide more consistent power output and longer run times than cordless tools. Metal-cutting saws have a lower RPM and higher torque than general purpose circular saws and are used for metal fabrication and autobody work. General purpose saws are most often used for cutting wood, but can be used for cutting other materials depending on the blade used for cutting.

https://catalogue.grainger.ca/2023?hybris=true

26 Results Found

In stock at branch(0)
Results per page :  16 | 32 | 48
  • MAKITA
  • CIRCULAR SAW, 120V AC/8 A, 5½ IN DIA, LEFT, 8000 RPM, 9 3/16 IN LENGTH
  • Item # MKT5005BA
  • Mfr. Model # 5005BA
  • EHC: EHC :
  • This circular saw operates at 120V AC/8 A. It has a max cutting capacity of 1 3/16 inches at 45 degree, 1¾ inches at 90 degree, 5½-inch blade diameter, and 8000 no-load RPM. The saw with a left-side blade has a ⅝-inch arbour, 9 3/16-inch tool length, 18 teeth carbide-tipped blade, and 10-foot cord. It includes a rip fence and a socket wrench.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MAKITA
  • CIRCULAR SAW, CORDED, 120V AC, 12A, 6½ IN DIA, 13/16 IN ARBOUR, 2000 TO 5200 RPM
  • Item # MKTSP6000
  • Mfr. Model # SP6000
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/12A. It has a rear/top handle and a variable/electronic speed control. The saw with a right side blade has a 6½-inch blade diameter, no load speed of 2000 to 5200 RPM, and a 13/16-inch arbour. It has a maximum cutting capacity of 1 9/16 inches at 45 degree and 2 3/16 inches at 90 degrees.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • JET
  • HOLE SAW, BI-METAL, ⅞ IN, 22⅕ MM DIA, 4 TO 6 VARIABLE TEETH, FOR SS, AL, COPPER, BRASS
  • Item # JET565106
  • Mfr. Model # 565106
  • EHC: EHC :
  • This hole saw is made of bi-metal and measures ⅞ inch. It has a diameter of 22⅕ millimetre and 4 to 6 variable teeth. The saw is ideal for cutting mild steel, stainless steel, aluminum, cast iron, copper, brass, wood, plastics, and composition board. It features hardened high-speed steel teeth and a tough shatterproof high-carbon steel body.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MAKITA
  • CIRCULAR SAW, 120V AC/10 A, 4⅜ IN DIA, LEFT, 12200 RPM, 9⅜ IN LENGTH
  • Item # MKT4100NH2ZX1
  • Mfr. Model # 4100NH2ZX1
  • EHC: EHC :
  • This circular saw operates at 120V AC/10 A. It has a bevel angle ranging from 0 to 45 degrees right, a cutting depth of 1¼ inches at 0 degree, and ⅞ inch at 45 degree. The saw with a left-side blade has a 4⅜-inch blade diameter, 12200 RPM, and a ¾-inch arbour. It has a 9⅜-inch tool length, four inches turbo rim diamond blade, and a 10-foot cord.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MAKITA
  • CIRCULAR SAW, CORDED, 120V AC, 14A, 10¼ IN DIA, RIGHT, 3¾ IN CUTTING, 10 FT, ⅝ IN ARBOUR
  • Item # MKT5104
  • Mfr. Model # 5104
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/14A. It has a 10 feet cord with an electric brake and meets the CSA/UL standard. The saw with a right side blade has a 10¼-inch blade diameter, no load speed of 3800 RPM, and a ⅝-inch arbour. It has a maximum cutting capacity of 2¾ inches at 45 degrees and 3¾ inches at 90 degrees.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MAKITA
  • CIRCULAR SAW, CORDED, 120V AC, 12A, 6½ IN DIA, 2 3/16 IN CUTTING, 13/16 IN ARBOUR
  • Item # MKTSP6000X1
  • Mfr. Model # SP6000X1
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/12A. It has a 10 feet cord with a rear/top handle and meets the CSA/UL standard. The saw with a right side blade has a 6½-inch blade diameter, no load speed of 2200 to 6400 RPM, and a 13/16-inch arbour. It has a maximum cutting capacity of 2 3/16 inches at zero degree and 1 9/16 inches at 45 degrees.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MAKITA
  • CEMENT SHEAR, CORDLESS, 18V, LI-ION, 3000 SPM, 13 MM THICK, LOCK-ON, FOR PLASTERS/BUILDERS
  • Item # MKTDJS800Z
  • Mfr. Model # DJS800Z
  • EHC: EHC :
  • This cordless cement shear operates on an 18V lithium-ion battery. It has a cutting speed of 3000 strokes per minute. The cement shear with a lock-on button has 13 millimetre thickness cutting capacity and 360 degree rotatable cutting head. It is suitable for plasterers, builders, and cladding installers.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MAKITA
  • CIRCULAR SAW, CORDED, 120V AC, 12A, 6½ IN DIA, 2 3/16 IN CUTTING, 13/16 IN ARBOUR
  • Item # MKTSP6000X2
  • Mfr. Model # SP6000X2
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/12A. It has a 10 feet cord with a rear/top handle and meets the CSA/UL standard. The saw with a right side blade has a 6½-inch blade diameter, no load speed of 2200 to 6400 RPM, and a 13/16-inch arbour. It has a maximum cutting capacity of 2 3/16 inches at zero degree and 1 9/16 inches at 45 degrees.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • JET
  • HOLE SAW, BI-METAL, 1 IN, 25⅖ MM DIA, 4 TO 6 VARIABLE TEETH, FOR SS, AL, COPPER, BRASS
  • Item # JET565108
  • Mfr. Model # 565108
  • EHC: EHC :
  • This hole saw is made of bi-metal and measures one inch. It has a diameter of 25⅖ millimetre and 4 to 6 variable teeth. The saw is ideal for cutting mild steel, stainless steel, aluminum, cast iron, copper, brass, wood, plastics, and composition board. It features hardened high-speed steel teeth and a tough shatterproof high-carbon steel body.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MAKITA
  • CIRCULAR SAW, CORDED, 120V AC, 15A, 7¼ IN DIA, 4500 RPM, 2⅜ IN & 1¾ IN CUTTING, ⅝ IN
  • Item # MKT5477NB
  • Mfr. Model # 5477NB
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/15A. It has a 10 feet cord with a tilt handle and meets the CSA/UL standard. The saw with a left side blade has a 7¼-inch blade diameter, no load speed of 4500 RPM, and a ⅝-inch arbour. It has a maximum cutting capacity of 2⅜ inches at zero degree and 1¾ inches at 45 degrees.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MAKITA
  • CIRCULAR SAW, CORDED, 120V AC, 15A, 7¼ IN DIA, RIGHT, 3 IN CUTTING, 0 ° TO 50 ° , ⅝ IN ARBOUR
  • Item # MKT5008MGA
  • Mfr. Model # 5008MGA
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/15A. It has a 10 feet cord and a bevel angle ranging from 0 degree to 50 degree. The saw with a right side blade has an 8¼-inch blade diameter, no load speed of 5200 RPM, and a ⅝-inch arbour. It has a cutting capacity of 2¼ inches at 45 degree, 2 inches at 50 degree, and 3 inches at 90 degrees.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 374
  • BOSCH
  • CIRCULAR SAW, CORDED, 120V AC/15A, 7¼ IN DIA, LEFT, 6200 RPM, ⅝ IN ARBOUR
  • Item # BOSCS5
  • Mfr. Model # CS5
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/15 A. It has a bevel capacity of 56 degree, a cutting depth of 1⅞ at 45 degree, 1⅝ at 50 degree, and 2 7/16 at 90 degree. The saw has a 7¼-inch blade diameter, 6200 no-load revolutions per minute, and a ⅝-inch arbour. It has an 11-inch tool length, an aluminum-made shoe, and 24 teeth carbide blade.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 374
  • MAKITA
  • CIRCULAR SAW, CORDED, 120V AC, 7¼ IN DIA, RIGHT, 2½ IN CUTTING, 0 ° TO 56 ° , ⅝ IN ARBOUR
  • Item # MKT5007MG
  • Mfr. Model # 5007MG
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/15A. It has a 10 feet cord and a bevel angle ranging from 0 degree to 56 degree. The saw with a right side blade has a 7¼-inch blade diameter, no load speed of 5800 RPM, and a ⅝-inch arbour. It has a cutting capacity of 1¾ inches at 45 degree, 1⅜ inches at 56 degree, and 2½ inches at 90 degrees.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # 374
  • MAKITA
  • CIRCULAR SAW, CORDED, 120V AC, 15A, 7¼ IN DIA, LEFT, 2⅜ IN CUTTING, 10 FT, ⅝ IN ARBOUR
  • Item # MKT5377MG
  • Mfr. Model # 5377MG
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/15A. It has a 10 feet cord with a worm drive handle and meets the CSA/UL standard. The saw with a left side blade has a 7¼-inch blade diameter, no load speed of 4500 RPM, and a ⅝-inch arbour. It has a maximum cutting capacity of 1¾ inches at 45 degree and 2⅜ inches at 90 degrees.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
  • MAKITA
  • CIRCULAR SAW, CORDED, 120V AC, 15A, 16 5/16 IN DIA, 4 3/16 IN CUTTING, 1 IN ARBOUR
  • Item # MKT5402NA
  • Mfr. Model # 5402NA
  • EHC: EHC :
  • This corded circular saw operates at 120V AC/15A. It has a 16 2/5 feet cord with an electric brake and meets the CSA/UL standard. The saw with a right side blade has a 16 5/16-inch blade diameter, no load speed of 2200 RPM, and a one-inch arbour. It has a cutting capacity of 6¼ inches at zero degrees and 4 3/16 inches at 45 degrees.

    View more View less

    SDS Document Not Found

    For assistance please contact the SDS Coordinator by email at productcompliance@grainger.ca

    CATALOGUE PAGE # N/A
Results per page :  16 | 32 | 48

Add to Order List

Your items were added

Your items were added to some lists

Max quantity exceeded. The item could not be added to the following List(s)

No Existing List Found. Please Create New List below.

Your list has been created

Please select a list