Caulks, sealants, and gasket makers are compounds that fill gaps and seal mating components to keep out contaminants and prevent leaks. Caulks and sealants fill small gaps, seams, and joints around bathroom fixtures, or window and door moulding to provide a finished look and improve energy efficiency by sealing holes where heat and cold air could escape. Spray foam sealants expand to fill wide gaps, such as those found around door frames and pipe. Gasket sealants and makers join two mating surfaces together, such as flanged components, to seal the bond and prevent leaks. Pipe sealants prevent leaks and loosening in pipe joints due to vibration, and seal out contaminants to prevent corrosion. Valve sealants protect valves from outside contaminants and prevent corrosion on internal components by filling in joints to seal out media flowing through the pipe.
This Tub/Tile/Ceramic silicone sealant comes in a 10 ounce cartridge. It is designed for use on kitchen and bath and meets the standards for FDA 21 CFR 177.2600, UL 94 HB. This silicone sealant has a working time of 25 minutes, plus it is mildew resistant and mold resistant.
This Tub/Tile/Ceramic silicone sealant comes in a 10 ounce cartridge. It is designed for use on kitchen and bath and meets the standards for FDA 21 CFR 177.2600, UL 94 HB. This silicone sealant has a working time of 25 minutes, plus it is mildew resistant and mold resistant.
This auto seam sealer caulk is for adhesion to bare metal or painted surfaces for all-purpose autobody applications, such as interior and exterior seam filling and trunk seams, voids, and gaps. This grey sealer fully cures in 24 hours and comes in a 12-ounce cartridge.
This auto seam sealer caulk is for adhesion to bare metal or painted surfaces for all-purpose autobody applications, such as interior and exterior seam filling and trunk seams, voids, and gaps. This grey sealer fully cures in 24 hours and comes in a 12-ounce cartridge.
These gasket sealants reinforce the seal of an existing gasket to prevent fluids and gases from leaking through joined parts in general purpose applications.
These gasket sealants reinforce the seal of an existing gasket to prevent fluids and gases from leaking through joined parts in general purpose applications.
These gasket sealants reinforce the seal of an existing gasket to prevent fluids and gases from leaking through joined parts in general purpose applications.
These gasket sealants reinforce the seal of an existing gasket to prevent fluids and gases from leaking through joined parts in general purpose applications.
These spray foam sealants come in an aerosol can and spray to fill gaps around doors, windows, ductwork, and plumbing fixtures. Spray foam sealants expand to fill hard-to-reach spaces and provide a barrier against air flow, dust, and unwanted pests. Once expanded and cured, excess foam can be trimmed away for a cleaner appearance.
These spray foam sealants come in an aerosol can and spray to fill gaps around doors, windows, ductwork, and plumbing fixtures. Spray foam sealants expand to fill hard-to-reach spaces and provide a barrier against air flow, dust, and unwanted pests. Once expanded and cured, excess foam can be trimmed away for a cleaner appearance.
This TF-15 thread sealant is black in colour and comes in a five-litre container. Pipe thread sealant tape wraps around pipe threads to ease assembly and seal the connection against leaks. This tape is made of PTFE (polytetrafluorethylene) which provides lubrication for tightening and loosening. The higher the tape density the greater the sealing power.
This TF-15 thread sealant is black in colour and comes in a five-litre container. Pipe thread sealant tape wraps around pipe threads to ease assembly and seal the connection against leaks. This tape is made of PTFE (polytetrafluorethylene) which provides lubrication for tightening and loosening. The higher the tape density the greater the sealing power.
This Touch 'n Foam 200 spray foam system kit is off-white and comes in a 13.29 Kg cylinder. It is designed for use on attics, basements, crawl spaces, ducting, foundations, rim joists, stud wall cavities and meets the standards for CAN/ULC S711.1-19, CAN-ULC-S711.1-11 (2018), CCMC 13600-L, ICC ESR 3052, Low Global Warming Potential. This spray foam system kit has a working time of 30 seconds and is fire resistant, moisture resistant.
This Touch 'n Foam 200 spray foam system kit is off-white and comes in a 13.29 Kg cylinder. It is designed for use on attics, basements, crawl spaces, ducting, foundations, rim joists, stud wall cavities and meets the standards for CAN/ULC S711.1-19, CAN-ULC-S711.1-11 (2018), CCMC 13600-L, ICC ESR 3052, Low Global Warming Potential. This spray foam system kit has a working time of 30 seconds and is fire resistant, moisture resistant.
This Loctite SI 5600 adhesive sealant is grey in colour and comes in a 400 mL cartridge. It meets the standards for UL746C. This adhesive sealant has a working time of 5 to 10 minutes.
This Loctite SI 5600 adhesive sealant is grey in colour and comes in a 400 mL cartridge. It meets the standards for UL746C. This adhesive sealant has a working time of 5 to 10 minutes.
Straw spray foam sealant cans come with an extension tube straw applicator that threads onto the can's valve stem. These applicators have a narrow diameter for reaching into small spaces and are for smaller coverage areas than gun spray foam sealant cans.
Straw spray foam sealant cans come with an extension tube straw applicator that threads onto the can's valve stem. These applicators have a narrow diameter for reaching into small spaces and are for smaller coverage areas than gun spray foam sealant cans.
Quickstix 548 gasket eliminator flange sealant can be applied to a variety of metal surfaces including aluminum to form a flexible solvent resistant seal. Seals to 300 degrees fahrenheit and fills gaps to 0.010 inches. 18 gram stick.
Quickstix 548 gasket eliminator flange sealant can be applied to a variety of metal surfaces including aluminum to form a flexible solvent resistant seal. Seals to 300 degrees fahrenheit and fills gaps to 0.010 inches. 18 gram stick.
This adhesive is brown and comes in a one gallon container. These RTV gasket makers replace the need for a precut gasket by filling the space between two mating surfaces. They cure in place and are useful for general purpose applications.
This adhesive is brown and comes in a one gallon container. These RTV gasket makers replace the need for a precut gasket by filling the space between two mating surfaces. They cure in place and are useful for general purpose applications.
These continuous rolls of gasket-making tape can be cut to the length needed to replace a precut gasket on a flanged joint. They are made of PTFE (polytetrafluoroethylene) which resists heat, chemicals, and friction.
These continuous rolls of gasket-making tape can be cut to the length needed to replace a precut gasket on a flanged joint. They are made of PTFE (polytetrafluoroethylene) which resists heat, chemicals, and friction.
To view Availability for another location, please enter postal code below
Availability dates may vary based on the assortment of product in the cart and is not final until you complete your order.